92mm Cooling Fan Dell 3-pin connector replaces JMC Datech 0925-12HBTA.

This is the alternative to the stock original fan. The 92mm x 25mm fan works great and replaces the Original JMC Datech 0925-12HBTA using the Dell proprietary 3-pin connector. It provides an excellent amount of airflow, at low noise levels, and will lower your overall system temperature.

This is a single speed fan and not temperature controlled. There is a possibility you may encounter an error message "fan not detected" upon bootup. This does not affect functionality which can be cleared manually and allow normal operation to continue. Not all Dells will do this, but some will. However, if the computer you are using has remote access, then this fan will not be suitable for your application.

Some users of these alternate fans have resorted to turning off the fan warning detection to bypass the error message on bootup. We do not advocate or endorse these methods. We are simply reporting what others have done to resolve this issue.

Most of the time, you can turn OFF the fan detector to avoid warnings. The settings are located in Power Management section of BIOS. Use the following settings: Low Power Mode=OFF and Suspend Mode=S1. Some users have had success setting their "halt on" settings to "no errors".

This is a quality and low cost alternative to the original one costing well over $50.00, and usually is refurbished.

*If you are looking for the Dell Original Direct Replacement fan for the 0925-12HBTA, the item is available for sale on our site as well.* Simply type into the site's search box: New JMC 9025-12HBTA-2.

Specifications:

. Condition: Brand New
. Size: 92mm x 92mm x 25mm
. Speed: 2200 RPM
. Tachometer: Yes
. Voltage: 12V
. Airflow: 39.2 CFM
. Noise: 27.5 dBA
. Connector: Dell proprietary 3-pin
. Bearing: Sleeve
. Wire Length: 17"