Bepanthen Moisturizing Eye Drops 0,5ml x N20
0.15% sodium hyaluronate and 2% dexpanthenol. After application of Bepanthen Eye eye drops, a sterile, preservative-free, viscoelastic, transparent protective layer is formed on the cornea. Bepanthen Eye eye drops contain sodium hyaluronate (sodium salt of hyaluronic acid) . Due to its physical properties, this material forms a uniform, stable, long-lasting protective layer on the epithelial layer of the eye without disturbing vision. In addition, Bepanthen Eye eye drops contain provitamin B5 (dexpanthenol). Dexpanthenol, with its ability to bind large amounts of water, moisturizes and protects the eyes and enhances the moisture-retaining ability of sodium hyaluronate.

Sodium hyaluronate (stabilizes the tear film) and dexpanthenol (nourishes, soothes) protects and moisturizes the eye surface and makes it slippery.

Bepanthen Eye eye drops reduce the discomfort associated with:
- mechanical stress, such as from hard or soft contact lenses or from eye diagnostic procedures;
- environmental stress, such as air conditioning, wind, cold, dryness or air pollution, such as cigarette smoke;
- eye stress due to intense viewing, such as working with a computer, microscope, or prolonged driving.

Bepanthen Eye eye drops do not contain preservatives, so these drops are well tolerated, even if used for a long time.. Bepanthen Eye drops are suitable for people wearing contact lenses. Contact lenses do not need to be removed while using eye drops.

Use of Bepanthen Eye Moisturizing Eye Drops

Tear off the single-dose container. To open, turn the flat end of the single-dose container (do not pull). With your head back slightly, gently pull the lower eyelid away from the eye, looking up, and add one drop to the conjunctival sac. It should be infused 3-5 times a day. Slowly close your eyes so that the liquid is evenly distributed on the surface of the eye. If the discomfort does not decrease or increases, consult an ophthalmologist!

Composition of Bepanthen Eye moisturizing eye drops

1 ml contains: sodium hyaluronate (0.15%), dexpanthenol (2%), sodium chloride, sodium citrate, citric acid, water for injections.