Permatex
INDIAN HEAD
Sealant Gaskets Shellac
is a strongly hardening, slow
drying liquid intended for primer,
sealing and repairing most types of gaskets, in
including those consisting of felt, paper, rubber, and
gaskets made of composite materials.
Seals metal gaskets and threaded
connections not designed for heavy duty
conditions. INDIAN HEAD
Gasket Sealant
Shellac is a dark brown, viscous
liquid with a characteristic smell of alcohol.

PRODUCT ADVANTAGES
• Retention of plasticity when drying
• Good resistance to fuel
• Improved reliability (of units)
• Saving time and effort
• Improved seal reliability
• Ease of use
• Easily removed from the surface if necessary
APPLIES
• Economical when carrying out various
installation works
• Effective for handling paper liners,
composite materials, felt and cardboard
• Pipeline connections
• Threaded connections
INSTRUCTIONS FOR USE
1. Spread the product with a brush or roller
on a dry surface, previously cleaned
from dirt, oils, rust, old paint or
sealants. When applied to gaskets,
make sure their surface is dry.
2. Sealant for Sealing Shells is used when
temperature from 4.4 ° C to 37.8 ° C.
3. The recommended thickness of the sealant layer depends on
type of surface. Typically wet layer thickness
(uncured) sealant applied evenly to the surface is about 0.0254
mm (0.010 inch).
4. When processing contacting each other
gaskets, apply sealant to both surfaces.
Pre-dry surfaces,
making sure they are dry by touch.

Deleting
To remove, you must use chloride
hydrocarbon mixtures, acetone or alcohol.