Permatex Copper Spray-A-Gasket Hi-Temp Sealant is an
aerosol product formulated as a sealant which helps dissipate
heat, prevents gasket burnout and improves heat transfer.
PRODUCT BENEFITS
• Contains metallic copper to improve heat transfer and
eliminate hot spots
• Remains tacky to allow gasket repositioning
• Works in temperature from -50°F and 500°F
• Resists shop fluids, including gasoline
• Fills surface imperfections
TYPICAL APPLICATIONS
• Cylinder heads gaskets
• Exhaust manifolds gaskets
• Turbo charger flanges
• Carburetor gaskets
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. Surfaces should be free of oil, dirt and grease.
3. Mask areas that should not be coated.
4. Shake can with ball agitator for one minute. For best
results, aerosol can should be at room temperature
before spraying.
5. Holding can 8 to 10 inches from the surface to be
coated, press the nozzle and discharge the product
uniformly. Apply to both sides of gasket. Avoid
overspray. DO NOT SPRAY into engine compartment.
Allow solvent to evaporate before assembly.
For Cleanup
1. Turn can upside-down and spray to clear nozzle.
2. Clean hands with Permatex brand hand cleaners.
Note: Aerosol product will coat 10 to 12 standard gaskets