ABRO silicone gasket sealant is specially designed for repairing gaskets in engines of Japanese cars, but can also be used in engines manufactured in the USA and Europe.
Ideal for replacing gaskets in the gearbox cover, thermostat housings, intake manifolds, crankcase pans, water pumps. It does not collapse under the influence of automobile liquids (except gasoline).
Main scopes:
valve lid;
water pump;
driveline
Benefits:
high temperature, up to + 343 ° С;
safe for sensors (lambda probe, etc.);
resistant to oil, antifreeze, water;
corrosion resistant;
on a neutral basis (odorless).
Method of application: Remove fragments of the old gasket and carefully, without scratching the metal, clean the surface of dirt, grease and oil. Hold the balloon at an angle of 45 degrees and apply along the perimeter to the entire mating surface, forming a layer with a thickness of 2-3 mm. Allow 10 minutes to dry before assembly. Compress both parts to be glued together by tightening the fixing bolts. Remove excess sealant with a dry cloth. Not recommended for cylinder head gaskets. Bonding time for metal parts - 1 hour. The full drying time for a 0.3 cm thick gasket is 24 hours. Content is under pressure.

Specifications of manufacturers:
ACURA 08718-550030E,
HONDA 08718-5500040E, HC2963817,
HYUNDAI 4C116-21000,
MITSUBISHI MD997740, MD997110,
NISSAN 999MP-A7007,
TOYOTA 00295-00102, 00295-01281, 00295-01208.