It takes any form and successfully withstands compression, tension and shear; completely not destroyed by the action of automobile oils, water and antifreeze.
Resistant to most automotive fluids (except gasoline).
The softer gasket sealant Blue (blue), as well as Clear (transparent) and Black (black), is designed for use at temperatures up to 260 ° C, while the gasket sealant Red (red) is designed for higher temperatures up to 343 ° WITH.
Mode of application:

1. Remove fragments of the old gasket and thoroughly clean the surface.
2. Remove the cap, pierce the protective foil and screw on the supplied nozzle.
3. Cut off the tip of the nozzle to create a hole of the required size.
4. Apply sealant gaskets around the perimeter to the entire mating surface, forming a layer with a thickness of 2-3 mm. Leave the holes for the mounting bolts.
5. Allow 10 minutes to dry before assembly. Complete drying of the formed gasket takes 24 hours.