Manual transmission. Gearbox additive

The composition is intended to protect against wear, extend the life and restore the characteristics of mechanical gearboxes of passenger cars, including robotic gearboxes of any design.

The tribotechnical composition is not an additive in gearbox oil, because it does not change the chemical and physical properties of the oil, but by the method of application it can be assigned to additives for gearboxes.

Processing of mechanical and robotic gearboxes is as follows:

Warm up the gearbox to operating temperature (normal operation).
Stop the engine.
Thoroughly mix the vial with the composition so that the sediment at the bottom is distributed over the entire volume of liquid.
Pour 1 bottle of the composition into the gearbox through the oil filler hole of the unit.
Immediately after adding the composition, drive the car for 20-30 minutes in the standard operation mode.
1 bottle of “MKPP” composition is enough to handle any gearbox with a transmission fluid volume of up to 3.5 liters.
Immediately after processing, the car can be used in normal mode. For long-term trouble-free operation of the gearbox, it is recommended to use the MKPP composition after each scheduled replacement of gear oil.