Additive gearbox, gearboxes and differentials

Tribotechnical composition for restoration of working surfaces of gears, reduction of hum and vibration during their operation. Designed for such units as: differential (including self-locking), transfer case, Haldex coupling, limited slip differential, final drive. It is suitable for use in units with any type of transmission fluid, since it does not change the chemical and physical properties of the lubricant and affects only metal friction surfaces.

By the method of application - adding to gear oil - can be attributed to additives for the gearbox.

INSTRUCTIONS FOR USE
The processing of differentials, transfer cases and other mechanisms is carried out according to the following procedure:

Warm up the mechanism to operating temperature, allowing it to work under load for 15-20 minutes.
Stop the car engine.
Thoroughly mix the vial with the composition so that the sediment at the bottom is distributed over the entire volume of liquid.
Pour 1 bottle of the composition into the mechanism through the regular filling hole. 1 bottle is enough for processing aggregates with a transmission fluid volume from 0.7 to 2.2 liters.
Immediately after adding the composition, drive the car for 20-30 minutes in the standard operation mode.
Immediately after processing, the car can be used in normal mode. For long trouble-free operation of the unit, it is recommended to use the “Reducer” composition after each scheduled replacement of the transmission fluid.

The tribo-technical compound “Reducer” is designed to protect against wear, extend the life and restore the characteristics of transfer boxes, differentials, self-locking differentials, viscous couplings, haldex couplings, limited slip differentials, and other automotive gearboxes that use any type of transmission fluid.