Injection & Carb Cleaner


Cleaner of the combustion chamber, throttle and fuel system (spray)
Restores engine performance. Perfectly removes carbon deposits, tar and other contaminants from injectors, carburetor, throttle. Instant action.

It is recommended to use every 8-10 thousand kilometers. Can be used for motorcycles.

Provides stable engine performance and improves injectivity.

Restores engine performance
Instant action
Provides stable engine performance
Mode of application
Shake well before use.

As a fuel system cleaner: let the car warm up (5-6 minutes at idle).
Make a gap by slightly loosening the rubber hose between the air filter and the camera, and insert the tube so that the product can be injected into the camera.

Start the engine and bring the revs up to approximately 2 thousand and, without slowing down, within 30 seconds. inject the cleaner.

Stop the motor and wait 5-6min., Put the rubber hose back in place.

Start the engine. Wait until the white smoke stops. Actions must be taken so that no liquid enters the air filter.

As a carburetor cleaner: after running the machine at idle for 5-6 minutes, remove the air filter so that the machine does not stall, bring revolutions up to 1000-1500, inject the cleaner in 30 seconds into the hole of the carburetor and turn off the engine for 5- 6 min, put the air filter in place.

Start the engine. Adjust the rpm if necessary.