CUPPER additive in motor oil (75 ml)

Designed to protect against wear and repair of gasoline and diesel engines without disassembly. Forms on the working surfaces of the friction pair a protective layer of plastic metal with a thickness of several atomic layers (nanoscale). The protective layer reduces specific loads by hundreds of times, provides excellent heat removal from the friction zone, and ensures the operation of the unit in the mode of wearless friction. As a result, the unit surpasses the new one in its operational characteristics and is guaranteed to last dozens of times longer.

For used cars

Allows you to restore and maintain compression, power and efficiency at the highest level.
Removes accumulated deposits.
For a new car

Allows you to perfectly work out the details to each other and provide maximum resource.
The process of running the engine is much faster.
Application:

The contents of one bottle is designed for an engine with a volume of oil system of 3-5 liters.

Pour the solution into the oil filler hole of the engine warmed up to operating temperature.
Start the engine and let it idle for 5 minutes.
Operate the vehicle in normal mode until the scheduled replacement of engine oil.
Benefits:

Restores and re-forms the ideal friction surfaces of parts of the cylinder-piston group, crank and gas distribution mechanisms, virtually eliminates the wear of engine parts.
Increases and levels a compression in cylinders.
Increases engine power and torque.
Reduces the amount of engine oil entering the combustion chamber.
Improves the combustion process.
Reduces fuel consumption.
Significantly reduces the consumption of engine oil "to waste".
Increases to the nominal pressure in the engine oil system.
Increases the service life of nodes tenfold.
Eliminates the negative effects of cold start.
Facilitates cold start.
Significantly reduces noise and vibration.
Improves engine performance after 250-300 km.
Allows short-term operation of the engine in case of emergency oil leakage.
Considerably increases the washing properties of engine oil, gradually washes old deposits to pure metal.
Restores the thermodynamics of the engine.
Slows down dozens of times the process of oxidation of motor oil.
Note:

The metal plating component CUPPER® is compatible with all types of motor oils, does not enter into chemical reactions with them and does not change their viscosity and other physicochemical properties.[! mpn:AEE-75!]