$27.97
Add to Cart
Batman NP
More than 10 available, 2 sold
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
This is made from a traditional steel neck plate for a Fender-style guitar or bass.
Standard 4 bolt neck plate that fits most bolt on neck guitars utilizing a rectangular 4 bolt plate.
Plate is manufactured in Japan and engraved in the USA.
Mounting holes are spaced 1-1/2" x 2" (38.10mm x 50.80mm) center-to-center.
The plate is 2" x 2-1/2" (50.80mm x 63.50mm).
Drill 1/8" (3.00mm) diameter holes in the neck, and 3/16" (4.75mm) holes in the body (if no holes are drilled).
The Image is permanently engraved into the metal and will not fade. When viewing these plates the image/design varies depending on the viewing angle and the level of available light. A good way to describe this effect is to compare it with a lcd tv/monitor (the flat type tv or computer monitor). If you have seen a lcd display you have probably noticed the display is not as "readable" and can produce a negative image from some viewing angles.
This type of engraving, like etching, is not deep into the metal.
The image is produced by striking the metal at varying depths. The depth of each strike is dependent on the brightness of each pixel of the image/design that is used to engrave. As you may know a digital image is made up of many small dots (pixels). This engraving process uses the brightness of each one of these dots (pixels) to determine how hard to strike the metal. The brighter the pixel the harder the metal is struck and black pixels are not struck. The contrast between the varying depths of these strikes creates the image/design.
-We do our best to represent our products accurately in our images. Photographing these items can be very difficult due to the reflective nature of the metal. Please be aware that the actual item you receive may not exactly match the coloring of the image(s) shown.
Standard 4 bolt neck plate that fits most bolt on neck guitars utilizing a rectangular 4 bolt plate.
Plate is manufactured in Japan and engraved in the USA.
Mounting holes are spaced 1-1/2" x 2" (38.10mm x 50.80mm) center-to-center.
The plate is 2" x 2-1/2" (50.80mm x 63.50mm).
Drill 1/8" (3.00mm) diameter holes in the neck, and 3/16" (4.75mm) holes in the body (if no holes are drilled).
The Image is permanently engraved into the metal and will not fade. When viewing these plates the image/design varies depending on the viewing angle and the level of available light. A good way to describe this effect is to compare it with a lcd tv/monitor (the flat type tv or computer monitor). If you have seen a lcd display you have probably noticed the display is not as "readable" and can produce a negative image from some viewing angles.
This type of engraving, like etching, is not deep into the metal.
The image is produced by striking the metal at varying depths. The depth of each strike is dependent on the brightness of each pixel of the image/design that is used to engrave. As you may know a digital image is made up of many small dots (pixels). This engraving process uses the brightness of each one of these dots (pixels) to determine how hard to strike the metal. The brighter the pixel the harder the metal is struck and black pixels are not struck. The contrast between the varying depths of these strikes creates the image/design.
-We do our best to represent our products accurately in our images. Photographing these items can be very difficult due to the reflective nature of the metal. Please be aware that the actual item you receive may not exactly match the coloring of the image(s) shown.
