Overlock Foot #2
Achieve perfect results with overlock seams, hems using overlock stitches, and oversewing seam edges.

* This foot is equipped with a pin which acts in a similar manner as the stitch finger on a serger. When the pin is placed along the edge of the fabric, it reinforces the edge as the stitch forms, preventing tunneling of the fabric
* The right side of the sole is cut away so the stitched edge of the fabric can move smoothly under the foot without any unnecessary pulling or stretching
* The vari-overlock stitch on all computerized model Berninas is preprogrammed so that the right swing of the needle will fall just off and to the right of the pin, which will prevent the fabric from tunneling
* Another application for this foot is sewing a narrow satin stitch. The satin stitch can be formed over the pin for a raised satin effect such as in charted needle work. Using the pin in the foot rather than knitting needles simplifies the process, especially for beginners.

Fits the following models of Bernina

700 Series models
730, 731, 732, 741, 742, 744
800 Series models
800, 801, 801s, 802, 802s, 803, 803s, 807, 808, 809, 810, 811, 811s, 817, 818, 819, 830, 830e, 830H, 831, 832, 840, 841, 842, 850
900 Series models
900, 900E, 910, 910N, 930, 931, 932, 940, 950
1000 Series models
1000, 1001, 1004, 1005, 1006, 1008, 1010, 1011, 1020, 1030, 1031, 1080, 1090
1100 Series models
1120, 1130
1200 Series models
1230, 1260
Also fits these models
1530 and 1630