$91.97
On Hold
Real Time Portable Personnel GPS Tracker SMS GPRS GSM Tracking Device System
More than 10 available
Details
Shipping: Australia: $16.00 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
1 Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote
targets by SMS or internet.
2 Applications
* Vehicle rental / Fleet management etc
* Powerful magnet+water proof,adsorbing in the hidden place of car.
* Protect child / the old / the disabled / pet etc
* Provide peace-of-mind for businessmen
* Manage personnel
* Track criminals secretly
3.Specification
Content
Specs.
Dim.
64mm x 46mm x 17mm(1.8”*2.5”*0.65”)
Weight
50g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz or 900/1800/1900Mhz
GPS chip
SIRF3 chip
GSM/GPRS module
Simcom Sim340 or Simcom Sim300
GPS sensitivity
-159dBm
GPS accuracy
5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Car charger
12—24V input
5V output
Wall charger
110－220V input
5V output
Battery
Chargeable changeable 3.7V 800mAh Li-ion battery
Standby
80hours
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing
5. Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
2 Push the foil along and turn it left.
3 Put the SIM card into the holder, and turn the foil right and fasten it in place
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.
Cautions:
a: For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
* Put the SIM card and battery in place.
* Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
* For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
* In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on.
* When this unit receives GPS signals normally, you can use it and do all the following settings.
5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings.
(default password: 123456)
For example,send SMS“ begin123456” to the tracker via a cell phone, If succeeded,
“begin OK” is returned by the device in SMS. If there is something wrong when
SMS “begin fail” is received, check out the format of commands sent and password
as well. Attention, begin+123456,the symbol“+” in the following,pls don't add “+” in
SMS,only begin123456 in SMS.this description is only for quick understand.
same argument,"space" not the word space,it means press the spacebar botton.
5.5 Change the password
Send SMS password+old password+space+new password to change the password.
Remark:
5.5.1 Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password.
5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.
5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “admin ok!” in SMS.
5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number.
5.7 Real-time polling
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info
*Tracking location, the SMS information about the lat./long. Received is the place received the GPS singal when the GPS singal is weak.Pls check the time received the SMS if there are some errors of the location.
5.8 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 5 times:
5.8.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value.
5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times
5.8.3 Cancel: Send notn+password to delete the “ auto track ”
Remark: the interval must not be less than 20s.
5.9 Voice Surveillance
In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for instruction).
5.10 Modes switch between “track” and “monitor”
5.10.1 The default mode is “track”.
5.10.2 Send SMS monitor+password to the unit, and it will reply “monitor ok!” and switch to “monitor”mode.
5.10.3 Send SMS tracker+password to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.11.2 Cancel: Send SMS nostockade+password to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.12 Movement alert
5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS move+password to the unit, then the unit will reply “move ok!”. In case of such a movement（the unit default distance is 200M）, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.12.2 Cancel: Send SMS nomove+password to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
5.13 Overspeed alert:
5.13.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-info to the authorized numbers. It will alarm one time in each setting.
5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may cause the excursion of the GPS signal influenced by clounds etc.
5.14 IMEI checking:
Send SMS command "imei+password" to the unit.eg.: Send SMS command "imei123456" to the unit,a imei number in 15 digits will be returned to your cell phone.
5.15 SOS button
Press the SOS for 3 second, it will send “ help me !+ Geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS ”help me!” to the tracker.
5.16 Low battery alert
It begins to alert when it is 3.4V and sends you SMS in 30m interval.
SMS format: low battery+Geo-info.
5.17 Change time
5.17.1 Send SMS “ time+space+zone123456+space+time zone to change time”.
For example, Send SMS“ time+space+zone123456+space+ 8 ”
For more selections please check out GPS Trackers
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote
targets by SMS or internet.
2 Applications
* Vehicle rental / Fleet management etc
* Powerful magnet+water proof,adsorbing in the hidden place of car.
* Protect child / the old / the disabled / pet etc
* Provide peace-of-mind for businessmen
* Manage personnel
* Track criminals secretly
3.Specification
Content
Specs.
Dim.
64mm x 46mm x 17mm(1.8”*2.5”*0.65”)
Weight
50g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz or 900/1800/1900Mhz
GPS chip
SIRF3 chip
GSM/GPRS module
Simcom Sim340 or Simcom Sim300
GPS sensitivity
-159dBm
GPS accuracy
5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Car charger
12—24V input
5V output
Wall charger
110－220V input
5V output
Battery
Chargeable changeable 3.7V 800mAh Li-ion battery
Standby
80hours
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing
5. Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
2 Push the foil along and turn it left.
3 Put the SIM card into the holder, and turn the foil right and fasten it in place
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.
Cautions:
a: For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
* Put the SIM card and battery in place.
* Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
* For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
* In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on.
* When this unit receives GPS signals normally, you can use it and do all the following settings.
5.4 Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings.
(default password: 123456)
For example,send SMS“ begin123456” to the tracker via a cell phone, If succeeded,
“begin OK” is returned by the device in SMS. If there is something wrong when
SMS “begin fail” is received, check out the format of commands sent and password
as well. Attention, begin+123456,the symbol“+” in the following,pls don't add “+” in
SMS,only begin123456 in SMS.this description is only for quick understand.
same argument,"space" not the word space,it means press the spacebar botton.
5.5 Change the password
Send SMS password+old password+space+new password to change the password.
Remark:
5.5.1 Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password.
5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.
5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “admin ok!” in SMS.
5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number.
5.7 Real-time polling
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info
*Tracking location, the SMS information about the lat./long. Received is the place received the GPS singal when the GPS singal is weak.Pls check the time received the SMS if there are some errors of the location.
5.8 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 5 times:
5.8.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value.
5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times
5.8.3 Cancel: Send notn+password to delete the “ auto track ”
Remark: the interval must not be less than 20s.
5.9 Voice Surveillance
In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for instruction).
5.10 Modes switch between “track” and “monitor”
5.10.1 The default mode is “track”.
5.10.2 Send SMS monitor+password to the unit, and it will reply “monitor ok!” and switch to “monitor”mode.
5.10.3 Send SMS tracker+password to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.11.2 Cancel: Send SMS nostockade+password to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.12 Movement alert
5.12.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS move+password to the unit, then the unit will reply “move ok!”. In case of such a movement（the unit default distance is 200M）, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.12.2 Cancel: Send SMS nomove+password to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district.
5.13 Overspeed alert:
5.13.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-info to the authorized numbers. It will alarm one time in each setting.
5.13.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may cause the excursion of the GPS signal influenced by clounds etc.
5.14 IMEI checking:
Send SMS command "imei+password" to the unit.eg.: Send SMS command "imei123456" to the unit,a imei number in 15 digits will be returned to your cell phone.
5.15 SOS button
Press the SOS for 3 second, it will send “ help me !+ Geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS ”help me!” to the tracker.
5.16 Low battery alert
It begins to alert when it is 3.4V and sends you SMS in 30m interval.
SMS format: low battery+Geo-info.
5.17 Change time
5.17.1 Send SMS “ time+space+zone123456+space+time zone to change time”.
For example, Send SMS“ time+space+zone123456+space+ 8 ”
For more selections please check out GPS Trackers
CN, Guangdong
