$3,066.27
On Hold
1959-1964 Chevy Chevrolet Impala Complete AIR Suspension KIT L1-2300
5 available
Details
Shipping: USPS calculated - check
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Everyone grew up with an old Impala in their family. You also remember the soft, wallowy ride that came with it! Of all the vehicles that we have developed air suspension
components for, the early Impalas have shown the most dramatic improvement in both ride quality AND handling performance.
The L1 system offers an economical solution to gain the advantage of riding on air. With the upgrade options, these systems can be equipped for any performance level.
The front CoolRide system for the 58-64 Chevy is a simple bolt-on install that relocates the shocks to the outside of the factory control arms. The air springs come complete with
brackets and hardware for proper mounting.
A CoolRide rear kit also includes all hardware and uses the OEM control arms.
The 3 gallon compressor system provides 4 way independent control with the use of RidePro valve body. It comes with easy to use analog gauges and electronic switches for accurate control.
System Includes:
ARF10600 58-64 Chevy Front CoolRide Kit
2- F6873 (224 style) front air spring
2- A012 Upper front air spring bracket w/ angle cut
2- A011 Lower front a-arm plate
2- MON32245 Shocks
1- A579D Upper Shock Bracket
1- A579P Upper Shock Bracket
2- S0003 Shock studs
2- A562 Aluminum Shock spacers
Hardware:
12- 3/8 x 1 Thread forming bolts Upper shock mounts
2- 3/8 x 3/4 uss bolts Lower air spring
4- 3/8 x 1 uss bolts Lower air spring mount
10- 3/8 uss nyloc nuts
26- 3/8 sae washer
2- 3/8 lock washers
2- 7/16 x 8 inch studs (customer will cut off to 6 ½ inches)
2- 7/16 uss washers
2- 7/16 uss nyloc nuts
2- 3/8 x 6 ½ USS bolts Sway Bar
ARR20600 58-64 Chevy Impala & Bel Air rear kit
2- F6873 (224 style) rear airspring
1- A543D-1 Driver side upper air spring bracket
1- A543P-1 Passenger side upper air spring bracket
2- A545-1 Lower air spring bracket
2- MON33082 Rear shock with 2 sleeves
Hardware:
2- 7/16” x 6” stud Upper air spring bracket to frame
2- 7/16” flat washer
2- 7/16” USS nyloc
4- 3/8” USS nyloc Upper air spring bracket
6- 3/8” flat washer
2- 3/8” x 3/4” USS bolt Lower air spring bracket
2- 3/8” lock washer
2- 5/16” x 1” SAE bolt Lower airsping bracket to arm
2- 5/16” lock washer
2- 5/16” flat washer
ARC4000 4 wheel compressor system w / 4 way Ride Pro controller
1- ARC5001 Compressor
1- CON4000 RidePro control panel (with electrical switches)
1- TANK3100 3 gallon aluminum tank
2- ARL2000 30 ft. roll of 1/4” DOT airline
2- ARL1000 1/8” airline (25 feet) manifold to gauges
1- ARV4000 RidePro air valve assembly
2- WIR1010A RidePro 10 foot extension harness with molded plug.
1- PRE1500 150psi pressure switch
1- FIT2150 1/8”npt x ¼” tube female straight for compressor
1- FIT7003 2” Brass Nipple for compressor
6- FIT4200 ¼”npt x ¼” tube Elbow airline fitting
7- FIT4000 ¼”npt x ¼” tube Straight airline fitting
4- FIT2000 1/8”npt x 1/8” tube Straight fitting for manifold to gauge fitting
1- FIT7004 ¼” plug to plug unused supply port
components for, the early Impalas have shown the most dramatic improvement in both ride quality AND handling performance.
The L1 system offers an economical solution to gain the advantage of riding on air. With the upgrade options, these systems can be equipped for any performance level.
The front CoolRide system for the 58-64 Chevy is a simple bolt-on install that relocates the shocks to the outside of the factory control arms. The air springs come complete with
brackets and hardware for proper mounting.
A CoolRide rear kit also includes all hardware and uses the OEM control arms.
The 3 gallon compressor system provides 4 way independent control with the use of RidePro valve body. It comes with easy to use analog gauges and electronic switches for accurate control.
System Includes:
ARF10600 58-64 Chevy Front CoolRide Kit
2- F6873 (224 style) front air spring
2- A012 Upper front air spring bracket w/ angle cut
2- A011 Lower front a-arm plate
2- MON32245 Shocks
1- A579D Upper Shock Bracket
1- A579P Upper Shock Bracket
2- S0003 Shock studs
2- A562 Aluminum Shock spacers
Hardware:
12- 3/8 x 1 Thread forming bolts Upper shock mounts
2- 3/8 x 3/4 uss bolts Lower air spring
4- 3/8 x 1 uss bolts Lower air spring mount
10- 3/8 uss nyloc nuts
26- 3/8 sae washer
2- 3/8 lock washers
2- 7/16 x 8 inch studs (customer will cut off to 6 ½ inches)
2- 7/16 uss washers
2- 7/16 uss nyloc nuts
2- 3/8 x 6 ½ USS bolts Sway Bar
ARR20600 58-64 Chevy Impala & Bel Air rear kit
2- F6873 (224 style) rear airspring
1- A543D-1 Driver side upper air spring bracket
1- A543P-1 Passenger side upper air spring bracket
2- A545-1 Lower air spring bracket
2- MON33082 Rear shock with 2 sleeves
Hardware:
2- 7/16” x 6” stud Upper air spring bracket to frame
2- 7/16” flat washer
2- 7/16” USS nyloc
4- 3/8” USS nyloc Upper air spring bracket
6- 3/8” flat washer
2- 3/8” x 3/4” USS bolt Lower air spring bracket
2- 3/8” lock washer
2- 5/16” x 1” SAE bolt Lower airsping bracket to arm
2- 5/16” lock washer
2- 5/16” flat washer
ARC4000 4 wheel compressor system w / 4 way Ride Pro controller
1- ARC5001 Compressor
1- CON4000 RidePro control panel (with electrical switches)
1- TANK3100 3 gallon aluminum tank
2- ARL2000 30 ft. roll of 1/4” DOT airline
2- ARL1000 1/8” airline (25 feet) manifold to gauges
1- ARV4000 RidePro air valve assembly
2- WIR1010A RidePro 10 foot extension harness with molded plug.
1- PRE1500 150psi pressure switch
1- FIT2150 1/8”npt x ¼” tube female straight for compressor
1- FIT7003 2” Brass Nipple for compressor
6- FIT4200 ¼”npt x ¼” tube Elbow airline fitting
7- FIT4000 ¼”npt x ¼” tube Straight airline fitting
4- FIT2000 1/8”npt x 1/8” tube Straight fitting for manifold to gauge fitting
1- FIT7004 ¼” plug to plug unused supply port
