Item Description: Brand New Extra Long, Soil pH Meter

The 12 Inch Probe allows you to test below the roots!

Item Specs:
*Dial Readout Display
* 3.0-8.0 pH
* 0.2 pH resolution
* +/- 0.2 pH Resolution
* Fixed Electrode
* Operating Temperatures: 5'C to 50'C (41'F to 122'F)
* Power Supply: NONE! Utilizes a Bimetallic Core!
* Size: 16.25" x 2" x 2"
* Weight: 170 Grams

This unit is not suitable for testing liquids! Soil only!Remove any obstruction to the soil that requires testing, such as surface soil, grass, leaves, pebbles, etc. If the soil is dry or contains too much fertilizer, sprinkle some water onto the soil and leave for 25-30 minutes before testing.Before using the tester, be sure to thoroughly clean its metallic surface with a piece of whetting cloth. When using a brand-new tester, we advise you to insert it into the soil a few times before taking your reading. This is in order to remove any oily impurities from its metallic surface that may affect the accuracy of your soil pH or moisture reading.Insert the meter directly into the soil that requires testing, embedding its metallic surface completely and tamp down the surrounding soil so that is adheres closely to the meter's metallic electrode surface. About ten minutes after inserting the meter in the soil, the pointer will indicate the correct value of pH or moisture. The meter may sometimes register different values depending on the oil surface, moisture content etc. Therefore it is advised you take an average of several measurements.Press the white button and the pointer will indicate the correct moisture value.After use, wipe all the soil or moisture off of the metallic surface.

Check out our eCRATER store! High Quality!This unit comes with a2 year warranty against manufacturers defects! You can buy with total confidence!

National Industrial Supply
30777 Rancho California #891420
Temecula, CA 92589
Phone: 951-308-9269
Fax: 310.733.5480
Email: [email protected]

We accept Paypal too!