$223.83
Add to Cart
LED Halo Angel Eye Fog Lights for 2010-2015 Chevrolet Equinox ls 1lt 2lt ltz
More than 10 available, 121 sold
Details
Shipping: Australia: $56.00 (more destinations)
Condition: Brand new
Equinox fog & driving lamps can cost upwards of 495.00 + Installation. BlingLights fog & driving lamps install within the bumper as shown, outperform the factory lamps and cost less guaranteed. Your favorite ride never looked so good.
More Than Improved Visibility
Experience the future of driving via an astonishing daylight-like visibility thanks to BlingLights BL-5000K proprietary light technology. Featuring a fog and driving, light-on-road pattern that can be easily seen in virtually any light including direct sunlight. You can also adjust the light angle for a unique experience.
The Light of Choice
Designed to imitate the appearance of ordinary dealership fog lamps, BL-5000K lamps light like original fog lamps and is compatible with the factory wiring and or light controls. In addition to increased visibility, BL-5000K includes everything needed to install, BlingLights’ BL-5000K fog and driving lamp kit includes a factory style toggle switch that blends cleanly into any flat surface within reach or out of sight.
BL-5000K Lamp Kit Specs:
- White LED Angel Eyes Combined With High Output 5000K White LED Fog and Driving Lamp
- Chip LEDs Provides 5,000 Lumens Per Lamp, 40,000 Hour Work Life And Less Than 30 Watt Draw.
- Projector Hybrid Fog Driving Beam is Far Reaching & Wide Spread. Xtra Technology.
- 3-Function Switch (I) Fog Lights (0) Off (II) Halo Angel Eyes
- Complete Wiring Harness With Relay, Fuse and Toggle Switch That Blends Cleanly Into Any Flat Surface Such as an Existing Switch Blank.
- IP67 Rated Lamps Are Built to Last With; Aluminum Housings, Mounting Hardware and Hardened Glass Lenses
- Installation Manual & US Phone Support
Receive a FREE Gift with Your Order Free While Supplies Last.
Risk-Free Trial
Take the BlingLights Challenge® and try any BlingLights product no-risk. Then Decide. If you don't love it, you don't keep it. ® No obligations, simply send it back, no questions asked - you keep the free gift.
Frequently Asked Questions:
Are these fog lights original equipment manufactured? No, these fog lights are manufactured by BlingLights. Many of our customers are able to install our fog light kit in a period of approximately 45 minutes to 2 hours. More involved installations may require drilling to position the lights where you want them. This kit includes mounting brackets that mount independently of the factory mounting points. If you have plastic inserts currently covering your fog light holes then you will have to remove those to install this kit, which is required of any fog light kit installation. The end result will be a clean look if done with care. For those uncomfortable with the install, have the kit professionally installed at a local car stereo shop.
Does the kit include everything I need? Yes, the kit includes 2 lamp enclosures for left and right side, angel eyes, adjustable mounting hardware, complete wiring harness with relay and fuse, factory style toggle switch, photo installation directions, free phone and email support and lifetime no-fault warranty.
Can I hook the lights up to my factory light switch instead of the included switch? Of course, just run the wire to the factory switch instead of the included switch. The included switch can also be substituted with other switches available through BlingLights.
What types of bulbs come with this kit? Chip 5000K White LEDs provides 5,000 lumens per lamp, 40,000 hour work life and less than 30 watt draw. The LEDs never need to be replaced.
Customer Feedback Letter 1:
Added Blinglights BL-1038W today and along with using the the GM bezel to give it the OEM look and it looks and works great!
Had to reshape the chrome (plastic) bezel to make the light fit good. Reemed out about 3/8 of an inch set the lights in and adjusted for up/down and left/right. Then epoxied them in so they would not move. Just checked it out at night and the results are GREAT!. I also have changed the low beam bulbs. I have good experiences in the past with this brand in my Impala SS and Envoy. Better brightness than stock. GM/Chevy really dropped the ball on stock lighting. Oddley enough my high beams on the 2010 Equinox are VERY bright and acceptable. Wiring was very easy with the exception of the supplied wires were to short and had to splice . No problem. Also changed the switch that was suppled thru Blinglights with a rocker switch from NAPA. It is a rocker with a green light and I mounted it just above the the round dial for the interior light adjustment. Power comes from a hard wire to the interior fuse box so that I can turn on and off at will and it will go off when I turn the ignition off.
Customer Feedback Letter 2:
I owe you this response from last summer. it has taken this long to get my lights installed, because I used my auto tech-spert rather than a stereo shop. I wanted you to see the results. Yet, my guy is as artistic as he is mechanical, but its worth the wait
Here we go.
He used the same materials, heavy gauge stainless steel whatever-piping-conduit-exhaust heavy stuff, to mount a housing for my fog lights - and for my dual exhausts which he installed at the same time. Both the front and back are clear coated and look really good. He opted to retain the large synthetic black plugs in the front which normally cover the fog light holes in the equinox, and meticulously carved out holes in the plugs to embrace the chrome-like-steel housings. This way we could decide how far out, or in, we wished to have the (now) chrome housed fog lights to be set. Back in, or protruding out.
We decided that "in" was pretty common, but that 'out' would catch one's eye, somewhat balancing with the extended dual exhaust.
I am enclosing a couple pics of the car after installation was complete. These are before the car was detailed and polished.
Thank you for your explanations last summer - hope you enjoy seeing how a crossover can be jazzed with your product, another way.
My techspert-mechanic is Rodney Anderson, Anderson Automotive, in New Castle, Pa.
Best
Wayne Bissell
Legal:
This product was designed for show use only. Laws may vary from state to state so check local laws regarding use of this product while traveling on public roadways. The manufacturer assumes no responsibility for damages, fines or claims resulting from the use of this product. The product was designed for show use only.
Designated trademarks and brands are the property of their respective owners.
More Than Improved Visibility
Experience the future of driving via an astonishing daylight-like visibility thanks to BlingLights BL-5000K proprietary light technology. Featuring a fog and driving, light-on-road pattern that can be easily seen in virtually any light including direct sunlight. You can also adjust the light angle for a unique experience.
The Light of Choice
Designed to imitate the appearance of ordinary dealership fog lamps, BL-5000K lamps light like original fog lamps and is compatible with the factory wiring and or light controls. In addition to increased visibility, BL-5000K includes everything needed to install, BlingLights’ BL-5000K fog and driving lamp kit includes a factory style toggle switch that blends cleanly into any flat surface within reach or out of sight.
BL-5000K Lamp Kit Specs:
- White LED Angel Eyes Combined With High Output 5000K White LED Fog and Driving Lamp
- Chip LEDs Provides 5,000 Lumens Per Lamp, 40,000 Hour Work Life And Less Than 30 Watt Draw.
- Projector Hybrid Fog Driving Beam is Far Reaching & Wide Spread. Xtra Technology.
- 3-Function Switch (I) Fog Lights (0) Off (II) Halo Angel Eyes
- Complete Wiring Harness With Relay, Fuse and Toggle Switch That Blends Cleanly Into Any Flat Surface Such as an Existing Switch Blank.
- IP67 Rated Lamps Are Built to Last With; Aluminum Housings, Mounting Hardware and Hardened Glass Lenses
- Installation Manual & US Phone Support
Receive a FREE Gift with Your Order Free While Supplies Last.
Risk-Free Trial
Take the BlingLights Challenge® and try any BlingLights product no-risk. Then Decide. If you don't love it, you don't keep it. ® No obligations, simply send it back, no questions asked - you keep the free gift.
Frequently Asked Questions:
Are these fog lights original equipment manufactured? No, these fog lights are manufactured by BlingLights. Many of our customers are able to install our fog light kit in a period of approximately 45 minutes to 2 hours. More involved installations may require drilling to position the lights where you want them. This kit includes mounting brackets that mount independently of the factory mounting points. If you have plastic inserts currently covering your fog light holes then you will have to remove those to install this kit, which is required of any fog light kit installation. The end result will be a clean look if done with care. For those uncomfortable with the install, have the kit professionally installed at a local car stereo shop.
Does the kit include everything I need? Yes, the kit includes 2 lamp enclosures for left and right side, angel eyes, adjustable mounting hardware, complete wiring harness with relay and fuse, factory style toggle switch, photo installation directions, free phone and email support and lifetime no-fault warranty.
Can I hook the lights up to my factory light switch instead of the included switch? Of course, just run the wire to the factory switch instead of the included switch. The included switch can also be substituted with other switches available through BlingLights.
What types of bulbs come with this kit? Chip 5000K White LEDs provides 5,000 lumens per lamp, 40,000 hour work life and less than 30 watt draw. The LEDs never need to be replaced.
Customer Feedback Letter 1:
Added Blinglights BL-1038W today and along with using the the GM bezel to give it the OEM look and it looks and works great!
Had to reshape the chrome (plastic) bezel to make the light fit good. Reemed out about 3/8 of an inch set the lights in and adjusted for up/down and left/right. Then epoxied them in so they would not move. Just checked it out at night and the results are GREAT!. I also have changed the low beam bulbs. I have good experiences in the past with this brand in my Impala SS and Envoy. Better brightness than stock. GM/Chevy really dropped the ball on stock lighting. Oddley enough my high beams on the 2010 Equinox are VERY bright and acceptable. Wiring was very easy with the exception of the supplied wires were to short and had to splice . No problem. Also changed the switch that was suppled thru Blinglights with a rocker switch from NAPA. It is a rocker with a green light and I mounted it just above the the round dial for the interior light adjustment. Power comes from a hard wire to the interior fuse box so that I can turn on and off at will and it will go off when I turn the ignition off.
Customer Feedback Letter 2:
I owe you this response from last summer. it has taken this long to get my lights installed, because I used my auto tech-spert rather than a stereo shop. I wanted you to see the results. Yet, my guy is as artistic as he is mechanical, but its worth the wait
Here we go.
He used the same materials, heavy gauge stainless steel whatever-piping-conduit-exhaust heavy stuff, to mount a housing for my fog lights - and for my dual exhausts which he installed at the same time. Both the front and back are clear coated and look really good. He opted to retain the large synthetic black plugs in the front which normally cover the fog light holes in the equinox, and meticulously carved out holes in the plugs to embrace the chrome-like-steel housings. This way we could decide how far out, or in, we wished to have the (now) chrome housed fog lights to be set. Back in, or protruding out.
We decided that "in" was pretty common, but that 'out' would catch one's eye, somewhat balancing with the extended dual exhaust.
I am enclosing a couple pics of the car after installation was complete. These are before the car was detailed and polished.
Thank you for your explanations last summer - hope you enjoy seeing how a crossover can be jazzed with your product, another way.
My techspert-mechanic is Rodney Anderson, Anderson Automotive, in New Castle, Pa.
Best
Wayne Bissell
Legal:
This product was designed for show use only. Laws may vary from state to state so check local laws regarding use of this product while traveling on public roadways. The manufacturer assumes no responsibility for damages, fines or claims resulting from the use of this product. The product was designed for show use only.
Designated trademarks and brands are the property of their respective owners.
