Upgraded Design: Our DIY chicken feeder kit has upgraded design of the chicken feeder port and sealing ring. The sealing ring is allowed to connect with the stopper cap to prevent the cap from being lost while feeding, and you can easily take out and put on the cap at any time, saving your time and effort. There are some small holes inside the feeder port that allow poultry to see the food inside, attracting them to come and feed.Great DIY Kit for Chicken Feeders and Waterers: The chicken water feeder comes with 6 chicken feeder ports, 6 chicken water cups, 6 stopper caps, 6 bushings, 1 hole saw kit (3.15"/80mm) with a smaller drill bit is fit for the circle saw to install the chicken feeder port, 1 bigger drill bit is used to install the chicken waterer. A great addition to your chicken coop, can meet the needs of feeding and watering chickens.Automatic Gravity Feed: Features automatic gravity feeding, which automatically fills up under the force of gravity, providing continuous feed and water for poultry while minimizing waste, overflow, and mess. Compared to traditional feeders, this no waste chicken feeder can save you time and energy as you don't need to add feed to the flock every day, all you need to do is check the feed level after 2 to 4 days, depending on the capacity of the container.Weather-proof and No Leakage: The automatic chicken feeders with a widened hood to protect the feed from rain and wind, keep feed dry and clean. The automatic refill chicken waterers come with gaskets and nuts to prevent from leakage. BPA-free material, safe and durable to use.Easy to Install: The poultry feeder kit comes with a 3.15"/80mm hole saw and a bigger drill bit. The whole installation process only takes a few minutes, all you need to prepare is a drill and a bucket. Follow our instructions to easily make an automatic chicken feeder and waterer kit, enjoy the DIY fun! Note: The installation height needs to be adjusted for different poultry. Product Description AUTOMATIC CHICKEN FEEDER PORT -Made of BPA-free material, durable and safe to poultry. -Designed with red color, chickens love bright color, the red color can get the chickens' attention and attract them to come and eat food -Note: We suggest that you can place the feeder port 6-10 inches above the ground, so that chickens can easily eat the food inside. Also the installation height needs to be adjusted for different poultry. Rain Proof Hood With a extended hood to prevent rain from flowing into the bucket or container, keep food dry and clean. Designed with Cover Come with a stopper cap to prevent other animals access, the cap can be connected with the sealing ring to prevent the cap from lost, and you do not need to worry about the placement of the cap. Besides, it is convenient to put in and take out at any time you want . Gravity Fed Chicken Feeder Designed with gravity fed, the poultry will be driven by gravity and feed them in a easier way. Under gravity, the feeder port can provide a continuous feed for your poultry and minimize waste, saving your time and feeding cost. Rubber Sealing Ring With a rubber gasket and nut to keep water from leakage. Please tighten the nut and check for leakage before use. AUTOMAIC REFILL AND NO LEAKAGE CHICKEN WATERER -Automatic refill chicken waterers. When they are empty, the valve will open to let water in. As soon as enough water is in the cups, the valve will close to shut off the water flow -There is a spring inside the water cups to lift the waterer when full, the spring is made of stainless steel which is not easy to rust -Easy to clean out the cups when they get dirty, all you need to do is dump them out and they’ll fill themselves up again Track Page Views WithAuctiva's Counter