The product is the most common used V.A.G Group diagnostic and coding program which we can provide for you.

With our program you will be able to diagnose, do coding and programming to all V.A.G model cars until 2021 :

- Volkswagen
- Audi
- Skoda
- Seat
With V.A.G Group Diagnostic Software you will be able to:

1.Gain factory level access to all systems in cars from 1990 through 2021.
2.Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
3.Alter settings through module coding accessible only by factory level tools
4.Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)View and log live data
5.Reset service reminder
6.Perform built in tests and calibrations normally reserved for factory level tools
7.Diagnose real failures instead of swapping parts!

Computer Requirements:

We recommend at least a 1 GHz dual-core processor with at least 2 gb RAM and windows 7, 8, 10 or 11 with an available USB 2.0 (or higher) port.
Slower computers or Windows 2000, XP, and Vista may work but are not officially supported.
Windows 8. 8.1 or 10 on a machine robust enough to support the respective operating system are also fine.



The program can be used with HEX-V2 interfaces.
We highly recommand the interfaces with Atmega Chipset.

After purchasing our product you will receive a download link with the programs and install instructions.