HHS 2000 ST grease, 500ml
High pressure resistant, sticky lubricant
High penetrating power, short thickening time
Lubrication is used in cases where liquid lubricants are not able to provide stable efficient operation, and the use of greases would require dismantling or disassembling the equipment
High adhesion
Instant evaporation of the solvent ensures strong adhesion of the grease to the surface and prolongs the life of the grease
High pressure resistant
The grease does not wear out for a long time and does not wash out even under intense loads. Ideal for lubricating parts that are difficult to lubricate frequently
Ideal for lubricating high alloy steel fasteners
The screwing resistance is significantly reduced. The probability of surfaces sticking to each other is practically excluded
Application area

Designed for lubrication of parts in hard-to-reach places experiencing high pressure, shock and vibration (door hinges, rods, chain and gear drives, etc.)

Mode of application
Spray grease on the lubrication point.
The grease easily penetrates even the smallest gaps and holes and thickens.
Specifications:
Base oil: partially synthetic
Heat resistance: 25 ... + 180 ° С, temporarily up to + 200 ° С
Color: yellowish
Density at 20 ° C: 0.74 g / ml
Oil viscosity: 1500 mm / s
Dropping point: 180 ° С
Flash point (with solvent / without solvent): 20/230 ° C
Wear factor SRV (DIN 51834): 78
Corrosion protection SKF Emcor (DIN 51802): 0-1