$50.36
Add to Cart
RS 232 to WG Wiegand Security Converter For Door Access Entry Control System
More than 10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
The converter support bidirectional conversion between Wiegand and signal RS232 signals, The device can achieve the wiegand go to RS232 and RS232 go to Wigan. The conversion process of automatic identification the signal transmission direction, Do not need manual operation and settings.
Converter use high anti-interference MCU Processing chip, built-in watchdog circuit, automatic check the equipment work state, Automatic reboot when abnormal working state.
Converter interface parameters:
Voltage:9-15v
Current:20mA/50mA
1.RS232 Interface Port
baud rate :9600
Data bits :8
Stop bit :1
2.wiegand interface Port
Support Wg26 Wg34.(Other protocols can be customized)
3.Applicable occasions
Wiegand 26/34 input > RS232 output
Need to convert the signal from wiegand equipment to the serial,
such as: access control Card reader,Barcode reader,Fingerprint access control,face Recognition machine,So the output data after conversion
You can get the date by the computer serial port, through the serial debugging software or super terminal. You can also design software to get the serial port data
RS232(serial input)>Wiegand 26/34 output
Need to convert the signal from serial equipment to the wiegand controller,
Such as IC/ID serial interface card reader, Barcode scanner or computer. After the conversion of wiegand WG26/34,The signal can input access controller Directly.
The input and output data format conversion
A.16Hex Output/Input
Number: 1
Wiegand format: WG26
RS232 format: 0xFF 0xFF 0xFF(3bit HEX)
Number: 2
Wiegand format: WG34
RS232 format: 0xFF 0xFF 0xFF 0xFF(4bit HEX)
B.Text (ASCII Code) input/output
According to the converter, from RS232 Interface output 10bit ASCII Code number,Such as:"0009019418"
Send a text "0009019418"
Access control software received is "9019418", in front of "000" Be omitted by software
Similarly, the Wiegand device such as ID/IC card reader read output the card number "0009019418"
The ID Card number printed on "0009019418"
The text is received "0009019418"
Connection method of converter
A.Connect PC serial port
Connect the input device (wiegand access controller)
Package:
RS232 to Wiegand converter x 1 pc
Converter use high anti-interference MCU Processing chip, built-in watchdog circuit, automatic check the equipment work state, Automatic reboot when abnormal working state.
Converter interface parameters:
Voltage:9-15v
Current:20mA/50mA
1.RS232 Interface Port
baud rate :9600
Data bits :8
Stop bit :1
2.wiegand interface Port
Support Wg26 Wg34.(Other protocols can be customized)
3.Applicable occasions
Wiegand 26/34 input > RS232 output
Need to convert the signal from wiegand equipment to the serial,
such as: access control Card reader,Barcode reader,Fingerprint access control,face Recognition machine,So the output data after conversion
You can get the date by the computer serial port, through the serial debugging software or super terminal. You can also design software to get the serial port data
RS232(serial input)>Wiegand 26/34 output
Need to convert the signal from serial equipment to the wiegand controller,
Such as IC/ID serial interface card reader, Barcode scanner or computer. After the conversion of wiegand WG26/34,The signal can input access controller Directly.
The input and output data format conversion
A.16Hex Output/Input
Number: 1
Wiegand format: WG26
RS232 format: 0xFF 0xFF 0xFF(3bit HEX)
Number: 2
Wiegand format: WG34
RS232 format: 0xFF 0xFF 0xFF 0xFF(4bit HEX)
B.Text (ASCII Code) input/output
According to the converter, from RS232 Interface output 10bit ASCII Code number,Such as:"0009019418"
Send a text "0009019418"
Access control software received is "9019418", in front of "000" Be omitted by software
Similarly, the Wiegand device such as ID/IC card reader read output the card number "0009019418"
The ID Card number printed on "0009019418"
The text is received "0009019418"
Connection method of converter
A.Connect PC serial port
Connect the input device (wiegand access controller)
Package:
RS232 to Wiegand converter x 1 pc
HK, NT
