Good layer thickness after first application
High degree of safety due to optimal weather protection
Shorter run times, recommended layer thickness per pass
Good covering power
Flexible use thanks to the adjustable spray head
Fast and reliable machining of large and small surfaces possible
Does not drain
Good wear resistance
Machine wash-resistant, impact-resistant
Short-term resistance to oil and fuel
Cathodic corrosion protection for all metal surfaces
Can also be used on wood, plastics, ceramics, glass, etc.
Recommended coating thickness 50 microns
Dries quickly, economical to use
Very good adhesion
Does not contain AOX

Specifications
Chemical basis: alkyd-acrylate composition
Color: aluminum
Density: 1.15 g / cm³
Adhesion test (DIN 53151): GT0-1
Layer thickness in one pass, after drying: ~ 50 microns
Recommended layer thickness: 50 microns
Film appearance time (at the recommended layer): 20-30 min
Complete drying time (at the recommended layer): ~ 8 h
Waiting time of the product before use (with the recommended layer): 45-60 minutes
Heat resistance: up to ~ + 250 ° C
Shelf life at temperatures from +10 ... + 25 ° C: 24 months
Suitable for exterior painting: yes (preliminary testing required)
Surfaces with good adhesion: metal, wood, paper, polycarbonate and polystyrene materials, PMMA

Mode of application
Metal surfaces must be cleaned, dried and degreased with a suitable product.

Shake the spray can thoroughly for about 2 minutes. Apply the material from a distance of approximately 30 cm. Apply several thin coats, remember that the thinner the coating layer, the higher the heat resistance. For applications on absorbent surfaces, we recommend using a suitable primer, eg water-based paint.

Application area
Inner side surfaces of a wheel, car body, air conditioning systems. It can also be used for decorative and protective painting of parts that are exposed to heat: engine, exhaust pipe, etc.

Attention!

Not suitable for use as a base for polyurethane, MS polymer and hybrid sealants