100% reflective!
Provides the car with a respectable appearance
Repels water and dirt when riding in bad weather
Gives the coating a beautiful shine
Protects the body from minor damage
Keeps paintwork from fading and fading

Runway liquid glass is a high-tech composition that allows you to preserve the color and structure of the paintwork, and also protects it from mechanical abrasive particles, atmospheric factors and possible chemical reagents. Ideal for protecting body paintwork from salt, dirt, ultraviolet radiation, gives a deep shine and masks minor scratches, increases the hardness of the paintwork. Protects against the effects of aggressive environments. Gives the car body pronounced hydrophobic properties, forming a high smoothness and has high water and dirt-repellent properties (wetting angle 120). Resistant to alkali and acids 1 - 14 pH. As a result of processing, the adhesion of insects, bitumen and oil film to the varnish is reduced.

Leave the set for polishing and imparting protective properties to the car body with the effect of liquid glass RUNWAY
• Reinforced activator to improve adhesion
• Microfiber towel for applying the activator
• Protective coating - liquid glass based polish
• Sponge-sponge, for applying the composition to the paintwork
• Microfiber towel for final polishing

1. Thoroughly wash the car body with shampoo (we recommend using Runway shampoo without wax)
2. Degrease the car body with a degreaser (we recommend using Runway degreaser)
3. Rinse off the degreaser with water
4. Rinse the car again using shampoo to remove any residual degreaser (we recommend using Runway shampoo without wax)
5. Dry the car with a soft non-woven cloth (we recommend using a Runway Racing microfiber cloth)
6. Apply the Activator to the element to be treated and polish it over the surface with even circular movements with the microfiber towel supplied
7. Take the 2-piece Protective Coating Sponge from the kit.
8. On the soft side of the sponge, for the first time, apply 5-7 ml of protective coating (3-4 drops) and apply it to the workpiece. Subsequently, you will need to add 2-3 ml of Protective coating (1-1.5 drops) for the rest of the elements.
9. In view of the fact that the Protective coating applied to the Activator hardens rather quickly in the open air, it is recommended to treat small areas of the car body 10-15 sq. Cm with the activator.
10. Apply Protective coating is required with short vertical strokes, small elements can be applied with horizontal strokes.
11. After applying the Protective coating to the element - leave it for 10-12 minutes so that the composition could penetrate deeper into the structure of the paintwork
12. Over time, polish the car body with a new, clean microfiber towel supplied, until a mirror-like shine appears.
13. It is recommended not to wash the car for 5-7 days after applying the protective coating

Service life under the conditions of application is from 6 to 12 months, depending on the frequency of washing and environmental conditions.