Spray grease HHS DRYLUBE
Dry, inertial force resistant synthetic grease with PTFE additives

Dry synthetic lubricant
Holds securely on fast rotating parts
Reduces adhesion of dirt
Excellent corrosion protection
Excellent flowability and penetration properties
Lubrication of hard-to-reach places
Penetrates between tight-fitting parts and internal cavities
With solid PTFE lubricating particles
Good protection against emergency loads, high thermal stability
Good material compatibility
Protects and preserves rubber rings and cuffs.
Compatible with plastic
Neutral to painted surfaces
Resistant to splashes, salt water, mild acids and alkalis
Silicone, resin and acid free
Specifications
Base oil: synthetic wax Solid lubricant: PTFE Thermal resistance: -30 ... + 100 ° C, temporarily up to + 180 ° C Color: yellowish Density at 20 ° C: 0.72 g / ml Dropping point: 100 ° C Flash point (with / without solvent) : −20 / 130 ° C NGLI class: 3 Wear factor SRV (DIN 51834): 350 SKF Emcor corrosion protection (DIN 51802): 0
Mode of application
Chains should be checked and lubricated at regular intervals. When checking, pay particular attention to chain tension. The slack should be 15-20 mm between the top and bottom of the chain when the sprocket is not loaded. Severe overtightening and sagging leads to rapid wear on the chain and sprocket teeth.

Thanks to its excellent flow properties, the active mixture of lubricant and solvent penetrates between tightly fitted assemblies, guaranteeing optimal lubrication. Evaporation of the carrier creates a highly efficient dry film with PTFE additives. O-rings and cuffs are kept in good condition and do not lose elasticity.

Application area
It is used to lubricate rapidly rotating parts such as chains, machine tool assemblies, cables, motorcycle chains.