Fast Cure Epoxy Mixer Cups contain both resin
and hardener in one convenient package. The two
components are color coded to assure complete mixing. Selfpackage mixing eliminates the need to squeeze tubes and
weighing scales. No mess, no guess, no waste. It is ideal for
bonding glass, hard plastics, and metal. It repairs loose trim
and broken grills. Fills casting cracks and holes.
PRODUCT BENEFITS
• Pre-measured resin and hardener for easy application
• Consistent strength and time savings
• Holds in 5 - 15 minutes
• Useable in 30 minutes
• Good moisture resistance
• May be drilled, tapped, sanded or machined and painted
after cure
TYPICAL APPLICATIONS
• Fills gaps and bonds trim
• Casting cracks and holes
• Auto trim and ornaments
DIRECTIONS FOR USE
1. Before starting, make sure your work area is protected
from accidental spills. Surfaces must be clean, dry
and free of grease and oil.
2. Roughen smooth surfaces to be repaired with
sandpaper.
3. Remove protective film from cup.
4. Using one of the mixer sticks provided, push down the
center of the kit to form mixer cup.
5. Scrape all of the epoxy hardener and resin into the
bottom of the cup and mix thoroughly until a uniform
grey color is achieved (approximately one minute).
6. Use mixing stick to apply epoxy to bonding area.
7. Press surfaces together until set - product will set up
in 5 to 15 minutes.
8. While epoxy is still tacky, the excess can be removed
with paint remover or mineral spirits.
9. Parts will fixture in 5 to 15 minutes; full cure is
achieved in 24 hours.