GREASETECH CAS EP 2 LS RED
High temperature grease based
calcium sulfonate
DESCRIPTION
AIMOL Greasetech CAS EP 2 LS Red -
high temperature grease with excellent
water resistant for lubrication of heavily loaded
bearings operating under high loads,
temperatures and water. Based on
calcium sulfonate and high viscosity base oil.
Specific characteristics of this grease are possible.
due to the fact that calcium sulfonate acts
in the role of both a thickener and a lubricant.

APPLICATION
AIMOL Greasetech CAS EP 2 LS Red especially
recommended for heavily loaded equipment in
metallurgy and other industries where
resistance to high temperatures, loads,
Humidity and water is critical. Thanks to her
reversible properties, AIMOL Greasetech CAS EP 2 LS
Red is very useful wherever it is.
spasmodic rapid temperature trends
growth in a short time. Typical AIMOL Application
Greasetech CAS EP 2 LS Red includes machine lubrication for
continuous casting (CCM), can
used in joints and worn rollers,
available in large quantities in steel
industry, in roller bearings, CV joints
cars, stone crushers and conveyors in
mining industry as well as bearings
and spindles in pulp and paper mills. AIMOL Greasetech CAS EP 2 LS Red can also be used
in the glass industry and in granulator presses.
Due to its consistency, it is suitable for
centralized lubrication systems and devices
forced supply of lubricants to the friction units.
ADVANTAGES
 Excellent thermal and mechanical stability
 Extreme water resistance, which gives
the ability to apply this grease where
a large amount of water vapor is found
 Superior load capacity thanks
high antiwear and extreme pressure
properties
 High corrosion protection thanks to
calcium sulphonate nature thickener
 Multifunctional grease
 Very high adhesion
 Good pumpability
 High dropping point
 Lead free or other metals
dangerous to humans and
the environment
 Application temperature range from -25 to
+ 1900С
SPECIFICATIONS
AIMOL Greasetech CAS EP 2 LS Red - performs and
exceeds the following requirements levels /
specifications:
 DIN 51502: KP2R-25, KP1 / 2R-25
 ISO 6743-9: L-XBFHB 2, L-XBFHB 1/2