A powerful tool for cleaning the carburetor, injector damper, exhaust gas recirculation (EGR) valve, and sizing of dead piston rings. An indispensable tool for the effective removal of carbon deposits and varnish deposits from atomizers of injectors, valves, combustion chamber, bottom and piston grooves on a disassembled engine.

easily removes coked deposits in carburetors, on parts of the gas distribution system and cylinder-piston engine group
in 2-3 minutes it softens and then flushes with a jet from an aerosol can the most old deposits and varnish deposits on valve seats and plates, gas exhaust ducts and exhaust gas recirculation (EGR) valves
within 20-30 minutes, it restores the mobility of the piston rings without disassembling the engine by introducing the drug into the engine’s supra-piston space through the spark plug holes.

Application
Carburetor Cleaning:

Remove the air filter. Start the engine.
Spray generously onto visible parts of the carburetor.
During cleaning, use the throttle lever to maintain increased engine speed.
Cleaning the injector flap:

On a warm idle engine, spray the agent abundantly onto the throttle (into the air intake manifold).
Ensure engine operation at increased speeds of 3-5 minutes.
Exhaust gas recirculation valve cleaning:

Dismantle valve
Spray generously onto contaminated valve surfaces
Wipe dry after 3 minutes
Repeat cleaning if necessary.
Parts Cleaning:

Spray generously onto contaminated surfaces.
Wipe dry after 3 minutes
Repeat cleaning if necessary.
Roxidation of rings:

Warm up the engine. The motor should be warm, but not hot.
Unscrew spark plugs (remove nozzles). Disconnect the ignition distribution sensor connector Hall sensor or switch
Spray (up to 5 seconds) through the nozzle hose in succession into each cylinder. Tighten candles (insert nozzles). Wait 10-20 minutes. Unscrew spark plugs (remove nozzles). Cover the openings with absorbent cloth so that the contaminants that have fallen out do not get on the paint. Crank engine with starter for several seconds.
Put the candles (nozzles) in place
Start the engine and ensure its operation at an increased engine speed of up to 15 minutes. During this time, residues of softened contaminants will be removed through the exhaust system