Acrylic insulating varnish for printed circuit boards

PLASTIK-71 is made on the basis of acrylic resin, perfectly satisfies the requirements of microelectronics.
It forms a shiny and flexible protective film that is resistant to acid, salt, mold, corrosive fumes, heat, mechanical damage, alkali, alcohol, moisture and aggressive environments.
It remains effective in a wide temperature range: from –70 to + 150 ° С.
PLASTIK adheres to various materials, such as metal, plastic, wood, cardboard, glass, etc.
It does not flow and allows soldering through a layer of varnish.

Application: Protection of printed circuit boards, electronic components, wires, cables, etc. Prevents current leakage, coronary effects, short circuits and electrical discharges. Protects components operating in poor atmospheric conditions from corrosion. Waterproofing of various materials, such as cardboard, wood, leather, etc.

Technical data:
Color: Almost colorless
Appearance of the film: Uniform smooth, colorless coating
Drying time: 24 hours at a temperature of 18-24 ° C
Interlayer drying time when applying several layers of varnish: 1 hour
Lacquer consumption per coat: 100-200 g / sq.m
Recommended number of layers: 1-2

Application method: by brush, roller or pneumatic spraying unit at an ambient temperature of 10 to 30 ° C, humidity not more than 80%.
Used solvent: P-5, 646, etc.

Special properties: The coating has increased hardness, water resistance, resistance to gasoline.