Set "Complete cleaning of the cooling system 1 & 2", 310 ml / 310 ml

Two-component kit for complete cleaning of the cooling system
IN DIFFICULT CASES OF CONTAMINATION OF THE COOLING SYSTEM
Completely cleans the cooling system of all complex combined contaminants.
Normalizes heat transfer processes and protects the engine from overheating.

STEP 1. Descaling and rust removal
At the first stage, scale and rust are completely removed from the cooling system. The system is preparing for the second stage of cleaning.

To avoid the release of antifreeze and flushing solutions, discharge liquids from the system at an engine temperature of no higher than 80 ° C.

PREPARATION OF THE DRUG IS DESIGNED FOR THE COOLING SYSTEM WITH A VOLUME OF 8-10 LITERS.
Drain antifreeze from the cooling system and heater.
Pour preparation No. 1 and add clean or distilled warm water to the MIN mark.
Warm up the engine to operating temperature and let it idle for 30 minutes.
Drain the wash solution.
Go to STEP 2.
COMPOSITION №1
A mixture of organic and inorganic acids, nonionic surfactant, antifoam, dye, distilled water.

STEP 2. Removing traces of oil and degradation products of antifreeze
In the second stage, traces of oil, emulsions and decomposition products of antifreeze are completely removed. Preparations are underway to fill the system with new antifreeze.

Pour preparation No. 2 and add clean or distilled warm water to the MIN mark.
Warm up the engine to operating temperature and let it idle for 30 minutes.
Drain the wash solution.
Flush the system: pour clean warm water, warm up the engine and let it idle for 15 minutes.
Drain the wash solution. Repeat the procedure if necessary.
Pour in new antifreeze.
COMPOSITION №2
Phosphate complexing agent, nonionic surfactant, pH regulator, dye, distilled water.