20PCS LOT Wholesale Wick Projector LAMP AC200W AC280W AC330W NSHA380W

AC200W AC280W AC330W NSHA380W projector lamp wick 20PCS LAMP INSTALLATION It is not required special skill to install the lamp. Just to loosen several screws. For lamp modules, it is simple, open the projector lamp door, take out the old lamp module, and insert the new one into it. Tips to make the lamp last longer 1. If the brightness can be adjusted, use the optimum brightness level. 2. Overheating is the major cause that leads to lamp failures. So switch off the lamps and let it cool when not in use, this will increase the lamp life. 3. Fans are vital parts that aid cooling, so they need to be cleaned and the dust should be removed from the filters that clog the same. 4. Use the projector in an area where there is sufficient space available for the heat rejection and venting of heat from the projector. 5. Do not expose the lamp or the projector to direct sunlight which will cause potential damage to the same beyond repair. 6. The best way to enhance the life of these lamps is to operate them in a suitable climate which is neither too hot nor cold