HHS GREASE Spray
High-quality, long-term grease with PTFE additives

Long service life
Superior protection against moisture and dirt
High oxidation stability
Extended grease intervals
Superior corrosion protection
High material compatibility
Compatible with plastic
Neutral to painted surfaces.
With PTFE solid lubricants
After rupture of the PTFE lubricating film, particles continue to lubricate (emergency operation)
High temperature resistance
With special white dye
Clearly greased areas during inspection and after-sales service
Resistant to splashes, salt water, weak acids and alkalis.
Silicone, resin and acid free

Application area
Designed for lubrication during maintenance or equipment inspection; recommended for lubrication of hinges, hinges, guides, etc.

Mode of application
The grease forms a protective “grease belt” against the penetration of moisture and dirt particles between the contacting parts. Dirt cannot get into the lubrication zone, which ensures long-term operation of the unit. Long intervals between lubricants are only possible with thorough cleaning of surfaces. We recommend the use of HHS CLEAN art. 0893.106.10 before each lubrication.

Specifications
Base oil: mineral oil / lithium soap
Solid lubricant: PTFE
Heat resistance: −15 ... + 130 ° С, temporarily up to + 150 ° С
White colour
Density at 20 ° C: 0.78 g / ml
Drop point: 130 ° С
Flash point (with / without solvent): −20 / 200 ° C
NGLI Class: 2
Wear Factor SRV (DIN 51834): 1638
Corrosion Protection SKF Emcor (DIN 51802): 1