Movil with zinc, Antiruster series, aerosol 520 ml

It provides hidden cavities with double anti-corrosion protection due to the zinc contained in the composition.

Protects against foci of electrochemical corrosion.

It creates a gel-like elastic coating that is stable over a wide range of operating temperatures - it does not drip from vertical surfaces when heated and does not crack when temperature changes.

After drying, forms a non-sticky semi-solid film.

It is applied to both wet and rusty surfaces, as well as to old anti-corrosion coatings.

It maintains high protective anticorrosion properties during the entire operation of the car.

Recommendations for use
Shake the bottle vigorously before use for 2-3 minutes.

Apply the composition using the supplied tube, which provides uniform spraying in hidden cavities.

When using Movil on external surfaces, the composition is applied without using a tube.

Application temperature - from +10 to +30 ° C.

Before applying the composition, the surface must be cleaned of dirt and loose layers of rust.

Consumption of the working composition, applied in one layer - 400 g / m².

The time of complete drying at a temperature of +20 ° C is 1.5-2 hours.

Movil is recommended to be applied in 2-3 layers with intermediate dryers.

To avoid traces of the composition on surfaces that are not subject to processing, it is recommended to protect them. If necessary, traces of Movil can be removed with ASTROhim Bitumen Stain Cleaner.

In order to avoid clogging of the spray head, it is recommended to turn the container upside down and spray at the end of work until clean gas flows.