$28.68
On Hold
Enamel for calipers, spray 520 ml ASTROHIM
More than 10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Enamel for calipers, spray 520 ml.
When ordering, write the color: yellow, red, blue.
Brightly colored calipers that came to everyday reality from the racing world are associated with the sporty character of the car, which is characteristic of sports cars. But first of all, this is an unsurpassed decorative appearance of the wheels and the spectacular appearance of the whole car.
Features of Enamel for ASTROhim calipers:
It is specially designed for painting calipers and brake drums of cars and motorcycles, therefore it is resistant to high temperatures (up to +120 ° C) arising from braking.
It is resistant to aggressive environmental factors such as moisture, road chemicals, sand and stones flying from under the wheels.
Provides corrosion protection to painted metal parts.
Gives the wheels of the car a spectacular appearance.
It can be applied without prior priming.
It has excellent adhesion to the painted surface, increased hiding power and weather resistance.
Due to the aerosol form of the package, it allows uniformly coloring products with complex geometry, as well as staining hard-to-reach areas.
Recommendations for use
Before applying the enamel, it is necessary to clean from rust, degrease and dry the surface.
In order to avoid traces of enamel on surfaces that are not prone to painting, it is recommended to protect them, for example, with masking tape.
Application temperature not lower than +10 ° С.
Shake the bottle vigorously before use for 2-3 minutes.
Enamel is recommended to be applied from a distance of 25-30 cm in 2-3 layers with intermediate dryers for 10-15 minutes.
During application, it is recommended to periodically shake the balloon.
Drying time "on stick" at a temperature of +20 ° C is at least 40 minutes.
Full drying time at a temperature of + 20 ° С - at least 5 hours.
Recommendations
For better adhesion, it is recommended to apply a primer before applying enamel.
In order to avoid clogging of the spray head, it is recommended to turn the container upside down and spray at the end of work until clean gas flows.
Consumption
1 cylinder for 1-2 square meters m[! mpn:AC-617!]
When ordering, write the color: yellow, red, blue.
Brightly colored calipers that came to everyday reality from the racing world are associated with the sporty character of the car, which is characteristic of sports cars. But first of all, this is an unsurpassed decorative appearance of the wheels and the spectacular appearance of the whole car.
Features of Enamel for ASTROhim calipers:
It is specially designed for painting calipers and brake drums of cars and motorcycles, therefore it is resistant to high temperatures (up to +120 ° C) arising from braking.
It is resistant to aggressive environmental factors such as moisture, road chemicals, sand and stones flying from under the wheels.
Provides corrosion protection to painted metal parts.
Gives the wheels of the car a spectacular appearance.
It can be applied without prior priming.
It has excellent adhesion to the painted surface, increased hiding power and weather resistance.
Due to the aerosol form of the package, it allows uniformly coloring products with complex geometry, as well as staining hard-to-reach areas.
Recommendations for use
Before applying the enamel, it is necessary to clean from rust, degrease and dry the surface.
In order to avoid traces of enamel on surfaces that are not prone to painting, it is recommended to protect them, for example, with masking tape.
Application temperature not lower than +10 ° С.
Shake the bottle vigorously before use for 2-3 minutes.
Enamel is recommended to be applied from a distance of 25-30 cm in 2-3 layers with intermediate dryers for 10-15 minutes.
During application, it is recommended to periodically shake the balloon.
Drying time "on stick" at a temperature of +20 ° C is at least 40 minutes.
Full drying time at a temperature of + 20 ° С - at least 5 hours.
Recommendations
For better adhesion, it is recommended to apply a primer before applying enamel.
In order to avoid clogging of the spray head, it is recommended to turn the container upside down and spray at the end of work until clean gas flows.
Consumption
1 cylinder for 1-2 square meters m[! mpn:AC-617!]
You may also be interested in:
-
$97.86
-
$41.90
-
$90.87
-
$55.62
-
$53.16
-
$124.51
-
$53.16
-
$32.11
-
$97.86
-
$27.91
RU, RUSSIAN FEDERATION
