RF Wireless Remote Control Switch System 3000M Long Range Transmitter & Receiver

Brand New, RF Wireless Remote Control Switch System 3000M Long Range Transmitter & Receiver ---------------------------------------------------------------------------------------------------------------------------------- Specifications: Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows. Transmitter: Channel: 1 CH Remote Control Distance:0-3000 M ( Ideal Distance without any block and signal interfere, it would rise and fall about 10%-90% with the block and signal interference.) Encode: PT2262 Frequency: 315 or 433 MHz Size: 150mm x 42mm x 26mm Power Supply: 1 x 6F22 9V Battery (NOT included) Receiver: Toggle/Self-Lock: Press->On; Press again->Off press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter). Latched/Inter-Lock: Press->On; Press other button->Off press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter ) Decode: Fixed code, soldering Power Supply (Operating Voltage): DC 9V / 12V / 24V Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC Work Voltage Range of Relay: AC 110-240V or DC 0-28V Operating Temperature: -40‘C - 80’C Package Includes: 1 x Receiver (with cover) 1/2/3 x Transmitter (without battery) Learn code and Remove Code Learn: input DC 9V/12V/24V to the receiver, the green indicator turns ON and last 3 seconds then turns OFF. Then press the learning button, the green indicator turns ON, then press the transmitter key, the green indicator turns OFF it means learning is successfull. Remove: keep pressing the learning button on the receiver until the green indicator turns ON >OFF>ON, it means the code is cleared successfully.