MULTIFUNCTIONAL CLEANING ADDITIVE (RINSING) IN GASOLINE SUPROTEC APROCHEM "SGA"

Soft additive in fuel SUPROTEK APROHIM "SGA" (MGA) is designed to restore and maintain the performance of the fuel systems of gasoline engines. It cleans (washes), lubricates, protects against corrosion and reduces the wear of nozzles, injectors and fuel pumps, maintaining their good condition. Recommended for permanent use in internal and external fuel injection systems, including TSI, TFSI, GDI, MPI and others.

EFFECTS FROM APPLICATION
The additive in gasoline SUPROTEK APROHIM "SGA" (MGA) (stands for Suprotec Gasoline Additive, pronounced "MGA") is a means of permanent use and is recommended to be added to the fuel at every refueling of the car. The main function of the additive is to clean and prevent the pollution of fuel equipment, to extend its life. The composition of the additive provides a number of actions in the fuel equipment:

Cleaning (washing). Surfactants in the composition of the "SGA" supplements gently and gradually clean the fuel equipment and do not allow the formation of new fuel deposits, which provides a long-term effect. Continuous cleaning maintains the working capacity of the fuel channels inside the pumps, injectors and injectors, ensures the correct fit of the mechanical parts: pump plungers, needles of the injectors and others.
Lubrication. Lubricating components of the composition reduce wear in the friction units of the fuel equipment, which prolongs the life of the units within the factory characteristics.
Corrosion protection. Additive in gasoline protects fuel equipment from water and condensate contained in the fuel.
Restoration of worn surfaces. SGA uses the Suprotec tribotechnology, which restores friction surfaces in fuel equipment (plungers, needles, valves), which ensures proper operation of the unit.
The “SGA” additive is recommended to be used primarily to restore the performance characteristics of fuel injectors and injectors. Symptoms of disruption of their work due to pollution can be the following symptoms:

Increased fuel consumption by 1 liter or more;
Falling dynamics of vehicle acceleration;
"Hard" engine operation;
Increased fuel consumption;
The characteristic smell of unburned fuel from the muffler;
Uneven engine operation at idle;
Black smoke with a sharp set of speed;
Difficult starting a cold engine;
All this indicates a violation of the proper and timely supply of fuel to the combustion chambers of one or more cylinders. Continuous use of "SGA" with several gas stations in a row with a high degree of probability will allow to get rid of these problems.

In the complex carried out by the additive effects improve the quality of sprayed fuel, the formation of the correct fuel torch.

This leads to the following effects:

fuel economy;
maintaining engine power and throttle response;
extending the service life of the fuel equipment, including reducing the likelihood of engine failure as a result of a leak in the needle / nozzle assembly of the fuel injectors and accumulation of gasoline in the cylinders during a long vehicle downtime;
prolongation of the service life of turbochargers (high-quality combustion of the fuel ensures that less soot and other contaminants enter the turbine);
extension of the service life of catalytic converters (catalysts);
reduction of exhaust smoke and the content of harmful impurities in them.
For vehicles with a mileage of more than 50,000 kilometers and an engine with an external mixture system, it is recommended to first apply the "Fuel System Cleaner" for gasoline engines, and then start using the SGA additive all the time.

In all other cases, it is recommended to use the additive "SGA" for a length of 8-10 thousand kilometers, and then apply the "Cleaner".

INSTRUCTIONS FOR USE
1 bottle of 50 ml is designed for 40 - 60 liters of fuel (approximately 1 ml per 1 liter of fuel). Before refueling the vehicle, pour the additive into the fuel tank.

For this:

shake the bottle thoroughly;
open the bottle and pour the additive into the fuel tank (if necessary, use the fuel funnel);
refuel the car.
If the vehicle has traveled more than 50,000 kilometers, it is recommended to fill 2 bottles at the first two gas stations
50 ml for 40 - 60 liters of fuel (or at the rate of 2 ml per 1 liter of fuel).