Movil with zinc, series Antiruster, aerosol 1000 ml

Provides the hidden cavities double anticorrosive protection thanks to the zinc which is contained in structure.

It protects against the occurrence of electrochemical corrosion.

It creates a gel-like elastic coating that is stable over a wide range of operating temperatures ” it does not flow down from vertical surfaces when heated and does not crack when temperature drops.

After drying it forms a non-stick semi-solid film.

It is applied both on a damp, and on a rusty surface, and also on old anticorrosive coatings.

Keeps high protective anti-corrosion properties during the entire period of vehicle operation.

Recommendations for use:
Vigorously shake the can before use for 2-3 minutes.

The composition is applied using the enclosed tube, which provides uniform spraying in hidden cavities.

When using Movil on external surfaces, the composition is applied without the use of a tube.

Application temperature - from +10 to +30 ° C.

Before applying the composition the surface must be cleaned of dirt and loose layers of rust.

Consumption of the working compound applied in one layer - 400 g / m².

Full drying time at a temperature of +20 ° C - 1.5-2 hours.

Movil is recommended to be applied in 2-3 layers with intermediate dryers.

In order to avoid traces of the composition on surfaces that are not subject to treatment, it is recommended to protect them. If necessary, Movil marks can be removed with the ASTROhim bitumen stain remover.

In order to avoid clogging of the spray head, it is recommended that at the end of the work the cylinder be turned upside down and sprayed until clean gas flows.