Professional flushing means for preventive maintenance of automatic transmission. Eliminates problems associated with hard shifting and other problems. Deletes the formed deposits on the parts and in the hydraulic system, allows you to remove insoluble contaminants from the box. As a result, the service life of parts and the entire unit increases.

It contains an effective complex of detergents and dispersing additives, which easily and in one application removes typical contaminants of the hydraulic unit channels, cavities of the torque converter and other automatic transmission mechanisms. It also removes wear products gears and clutches. As a result, the automatic transmission works more adequately, without jerks and slip.

- Effective and careful removal of pollution
- Restores smooth gear shifting
- Not aggressive to materials of glands, gaskets and friction discs
- Economical to use
- Does not harm the environment
- Easy to use

The use of Automatik Getriebe-Reiniger automatic transmission flush allows for deep cleaning of the oil system of the box and reducing the likelihood of breakage due to heavy deposits and carbon deposits that do not leave the system with a simple oil change.


Before using the flushing agent, it is necessary to warm up the automatic transmission to the operating temperature.
Add the contents of the jar to the automatic transmission fluid and start the engine. A 300 ml can is sufficient for 6 - 9 l of ATF.
During the flushing cycle, which takes 12 to 15 minutes, it is necessary to translate the selector to control the automatic transmission operation modes in different positions several times, while holding down the brake pedal (do not press the gas pedal!).
After the flushing cycle, replace the transmission fluid.

This tool can be used only in the conditions of service stations with the use of special equipment to ensure the replacement of the full volume of fluid in the automatic transmission.