Grease to protect electrical contacts EFELE
Universal electrical insulating grease
Lubricant for electrical contacts EFELE The best solution for servicing electrical contacts is to lubricate the contacts of EFELE. It is designed for cars, industrial and household equipment. The composition of the material includes silicone fluid, inorganic thickener and additive package.

EFELE dielectric grease is a uniform, thick white color. It keeps well in the joint, does not merge, does not dry out during work, retains its properties throughout the entire service life of the equipment.

The main advantages of the material:
It has high dielectric properties.

It has thermal and frost resistance. The composition is used in a wide range of temperatures: -40 ° C ... + 160 ° C.

It prevents the formation of corrosion and oxidation.

Do not wash off with water and weak acid and alkaline solutions.

Protects contacts from short circuit.

Prevents leakage current from the connection.

Reliably seals and insulates.

It is compatible with most plastics and elastomers.

Grease application
EFELE electrical contact grease is versatile, suitable for use in all types of electrical contacts: removable, one-piece, sliding and switchable. It reliably protects battery terminals, relay contacts, sensors, power plugs, sockets, electrical connectors and high-voltage ignition wires.

Lubrication is used to establish contact connections that are controlled:

Outdoors, under the influence of climatic factors affecting the place;

when temperature and humidity fluctuate;

in a humid and maritime climate;

in underground premises without heating and ventilation, including mines, basements, soil;

in rooms where prolonged stay of water or frequent condensation of moisture on the surface is possible.

How to apply grease?
Before using the lubricant contact surfaces must be prepared in advance: clean with a metal brush or emery paper. Remove abrasive dust with a dry cloth, brush or other means.

Grease should be applied to fully assembled and cleaned contact with an even layer 2 mm thick. If necessary, excess material is removed with a soft cloth or lint free.

Lubricant for electrical contacts is produced in a removable blister pack. Durable plastic dispensers are easy to use and transport. Through the elongated flexible packing of the material, it is easy to apply to electrical contacts in hard-to-reach places where it is difficult to use other compounds. Lubricant is packaged in dispensers weighing 15 grams.