5pcs BGA Desoldering Wire WL-1515/2015/2515/3015/3515Desoldering Braid SolderTin Description:HW0001566 Specification: Brand new Material: Copper wire Melting point: ＞100℃ Length: approx. 1.5m Width: approx. 3.5 / 3.0 / 2.5 / 2.0 / 1.5mm Oxidation resistant and anti-corrosion. Good thermal conductivity. How to Use: 1. Place the desoldering wick over the solder to be removed, then put the heated soldering iron tip onto the desoldering wick. The solder will be absorbed. 2. Remove the desoldering wick after the solder has been absorbed. 3. Cut off the used section of the wick using nippers. 4. Repeat steps 1, 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder Sn63% and 60% (tin content) have good absortbability. Package included: 1 x WL-1515 Desoldering Wire 1 x WL-2015 Desoldering Wire 1 x WL-2515 Desoldering Wire 1 x WL-3015 Desoldering Wire 1 x WL-3515 Desoldering Wire Note: Please allow 1-5cm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same. Specifications:Brand Name:MayitrMaterial:Copper / Copper AlloyMelting Point:More than 100CFlux Content:otherModel Number:Desoldering WireApplication:Desoldering WickDiameter:otherWeight:0.05 KG