Weight: 0.840kgKind shooting: Self Full FigureProduct Size: approximately equal to: 16 * 18cmProduct Material: ABS plasticPrinciple: By rotating the resilient wire has a bend turn into the sewer pipes clogged, the clog things cloth, hair and the like to bring out Operation method:1. Hold the handle in one hand and loosen the screw so that the wire is flexible.2. Pull out the wire into the pipe mouth, in case of difficult to reach into the steel wire into the stretch, the wire from the pipe to the mouth from the 8-10 cm (from the root of the sleeve to the pipe port) to tighten the screw to stop hand grip Apply a certain pressure in the pipe, the other hand clockwise, steel wire into, and then loosen the screw, in this way until it reaches the blockage.3. Shake the pan to feel slightly heavier, the tube filled with water, to crush the broken objects broken, (broken water that is washed away, the pipeline dredge) In case of stirring does not break the object, that is clockwise shaking Turn out the wire, you can not stir the broken objects hook out the pipeline to clear the end.4. After use, the dirty wire out, rinse with water, dry, and coated with a layer of oil or oil on the wire, then push the wire to the turntable in the future for later use. Special circumstance exclusion method:1. In case of special objects fall into the pipeline, such as toothbrushes, chopsticks, spoons, etc., can be a small soft cloth or cotton yarn, wire into the pipe, stir up the soft cloth can be copied up.2. In case of the wire does not reach into the pull also not (such as hooked iron peak, etc.) Do not force the pull, the wire should be shortened, tighten the rotation of the screw, counterclockwise rotation turntable, you can pull out.3. If the wire hook in the middle of the object unfortunately fall, please pull out the wire, repeat the operation until hook out. Precautions:1. Loosen the screw, do not wire the cable facing the body, to prevent the wire cable and wounding.2. Do not operate or play with minors to prevent danger.3 spring wire tail and clear the shell is not fixed, in the twist spring steel wire should not force too much, so as not to fall out of the spring tail, so that the spring wire into the pipe. (If the fall can be installed back to use)4. Remember to maintain. (Spring wire cleaning, dry, rub oil)