Swing Gate Control Panel
Application:Used for DC swing gate opener
Voltage: DC 24V
Protection fuse: 10A
Modulation: ASK modulation
Board Memory: 120 rolling code transmitters
Frequency: 433.92mhz (other frequency customized)
Output Voltage: DC 24V

If you need remote control for this board contact us


Features :
1. Digital LED Menu brings a easy setting,plug and play.
2. Open/Close single leaf or double leaves.
3. Separate force setting for motor 1,motor 2 and high speed, slow speed brings the motors working accurately.
4. Auto-closing time can be adjusted from 1 second to 99 seconds.
5. Total 60’s working time to protect the motors.
6. Terminals available for loop detector, photocell, push button, keypad, access control equipment etc.
7. Compatible with both electric lock and electromagnetic lock.
Extra relay out put for lock of pedestrian door or other external devices.
8. Custom rolling code makes the system more secure.
9. Available to connect back up battery or solar system.

Compatible with
- All swing operators that uses the same board
- Our NSEE Swing operators
PKM-C01
PKM-C02


Connecting issue:

1. 1 SIDE terminal is used for connecting any external device that operates single gate

2. COM terminal is COMMON used for connecting the “ground” of external devices

3. 2 SIDE terminal is used for connecting any external device that operates double gate

4. Swipe Card terminal is used for connecting any external devices that will operate to open the gate

5. COM terminal is COMMON used for connecting the “ground” of external devices

6. Infrared terminal is used for connecting photo electric sensor

7. 12V DC output is used for connecting photo electric sensor (Continuous output current