Swing Gate Control Panel
Application:Used for AC slide gate opener
Voltage: AC 110V
Protection fuse: 20A
Modulation: ASK modulation
Board Memory: 120 rolling code transmitters
Frequency: 433.92mhz (other frequency customized)
Output Voltage: AC 110V

IF YOU NEED REMOTE CONTROLS CONTACT US

Features :
1. Auto-closing time can be adjusted from 1 second to 99 seconds.
2. Terminals available for photocell, push button, keypad, access control equipment etc.
3. Custom rolling code makes the system more secure.

Compatible with
- All slide operators that uses the same board
- Our NSEE Swing operators
PK1500
PK1600

1.Single button can finish all the control command(such as close, open, stop)

2.Can delete any remote control separately
3.Can adjust the working time of motor
4.Can program the time of auto close
5.Can set auto close when restored power after power off
6.With infrared detection connector

1 for magnetic limit switch input

2 for motor wire input

3 for power input

4 for adjusting the torque force

5 for for adjusting closing force

6 dip switch for multi function setup

7 is learning button to program remote control(press learn button, then press any key of remote control two times to add remote controls)

8 is testing button to test the motor;

9 for change the motor running direction

10 for flashing lamp input

11 is remote control receiver

12 for photocell, manual button, keypad and gsm input