$137.66
On Hold
Pixracer Autopilot Xracer V1.0 Flight Controller Mini PX4 Built-in Wifi For FPV Racing RC Multirotor
8 available
Details
Shipping: Australia: $9.00 (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Pixracer Autopilot Xracer V1.0 Flight Controller Mini PX4 Built-in Wifi For FPV Racing RC Multirotor
Package includes:
1 Pixracer V1.0 Flight Controller
Product Introduction
The new Pixracer (formerly called XRacer) is available now and is fully supported by the Arducopter and PX4 community. Its a genuine open source project, already running with PX 4 stack software / QGroundControl (QGC), as well with Arducopter / Mission Planner (MP).
This is not just another small Pixhawk knock off or derivate, the Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. It comes with an upgraded Invensense Sensor generation (bye bye tricky LSM 303), a plug in Wifi board and last not least with a 2MB Flash : A real upgrade compared to former versions.
Brief Description:
Product Name: Pixracer V1.0 Flight
MCU: STM32F427VIT6 rev.3
PCB dimensions: 36mm*36mm
FRAM: FM25V02-G
LDO Ultra low noise LDOs for sensors and FMU
MPU9250, ICM20608, baro MS5611, mag HMC5983
Connectors: GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 ( TxD, RxD, CTS, RTS ), USART2 ( TxD, RxD, CTS, RTS ), FRSky-IN, FRSky-OUT, CAN, USART8 ( TxD, RxD ), ESP8266 ( full set ), SERVO1-SERVO6, USART7 ( TxD, RxD ), JTAG ( SWDIO, SWCLK ), POWER-BRICK ( VDD, Voltage, Current, GND ), BUZZER-LED_BUTTON
MicroSD card reader
RGB LED
Micro USB
+ WiFi ESP8266 802.11bgn ( Included) .
This popular add on is a very versatile solution, you might want to check its wiki as well: http://www.esp8266.com/wiki/doku.php...th-the-esp8266 , the included WiFi Module is ready to use.
JST GH series connectors for easy and robust peripheral connections, DF13 haters will love those.
Dimensions: 36 x 36mm with 30.5 x 30.5mm hole grid with 3.2mm holes
Weight Pixracer: ( incl uSD and WiFi ) - app. 10.9g , ACSP4 - 7.86g ACSP5 app. 2.32g
Full set of professional flexible silicone cables for almost any peripheral module included.
Power supply - 5-5.5VDC from USB or PowerBrick connector.
Currently Ships:
Insured Priority Express Shipping 6-12 Business Days U.K. and all other destinations.
Express Shipping Service 7-15 business days all U.S. destinations
U.S. Shipping Carriers FED-X or DHL
Package includes:
1 Pixracer V1.0 Flight Controller
Product Introduction
The new Pixracer (formerly called XRacer) is available now and is fully supported by the Arducopter and PX4 community. Its a genuine open source project, already running with PX 4 stack software / QGroundControl (QGC), as well with Arducopter / Mission Planner (MP).
This is not just another small Pixhawk knock off or derivate, the Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. It comes with an upgraded Invensense Sensor generation (bye bye tricky LSM 303), a plug in Wifi board and last not least with a 2MB Flash : A real upgrade compared to former versions.
Brief Description:
Product Name: Pixracer V1.0 Flight
MCU: STM32F427VIT6 rev.3
PCB dimensions: 36mm*36mm
FRAM: FM25V02-G
LDO Ultra low noise LDOs for sensors and FMU
MPU9250, ICM20608, baro MS5611, mag HMC5983
Connectors: GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 ( TxD, RxD, CTS, RTS ), USART2 ( TxD, RxD, CTS, RTS ), FRSky-IN, FRSky-OUT, CAN, USART8 ( TxD, RxD ), ESP8266 ( full set ), SERVO1-SERVO6, USART7 ( TxD, RxD ), JTAG ( SWDIO, SWCLK ), POWER-BRICK ( VDD, Voltage, Current, GND ), BUZZER-LED_BUTTON
MicroSD card reader
RGB LED
Micro USB
+ WiFi ESP8266 802.11bgn ( Included) .
This popular add on is a very versatile solution, you might want to check its wiki as well: http://www.esp8266.com/wiki/doku.php...th-the-esp8266 , the included WiFi Module is ready to use.
JST GH series connectors for easy and robust peripheral connections, DF13 haters will love those.
Dimensions: 36 x 36mm with 30.5 x 30.5mm hole grid with 3.2mm holes
Weight Pixracer: ( incl uSD and WiFi ) - app. 10.9g , ACSP4 - 7.86g ACSP5 app. 2.32g
Full set of professional flexible silicone cables for almost any peripheral module included.
Power supply - 5-5.5VDC from USB or PowerBrick connector.
Currently Ships:
Insured Priority Express Shipping 6-12 Business Days U.K. and all other destinations.
Express Shipping Service 7-15 business days all U.S. destinations
U.S. Shipping Carriers FED-X or DHL
You may also be interested in:
-
$156.67
-
$55.95
-
$243.41
-
$13.98
-
$86.93
-
$30.71
-
$13.92
-
$67.71
-
$107.72
-
$251.82
