Light Your Room at Night Guide You in The Dark Installation: 1.Clean the installation surface 2.Connect the battery box, strip light and sensor switch as the picture shows 3.Adjust the delaying time of off(original set in 30s), you can reset it between 30s-10mins from the time-delaying rotary knob on the back of the sensor switch. 4.The installation of sensor switch: choose a place that can directly sense the human body and environment brightness; it is suggested install the place as picture shows 5.Put the connected products on the corresponding place as picture shows 6.Plug in the electricity, LED light will be on, at this time the sensor switch will enter the automatically revising mode, after 30s the sensor switch will be on stand-by mode 7.After installation and revise, use the clip to firm the cables Specification: LED type: 3528SMD LED QTY: 30leds/m Strip size: 1m/1.5m Color temp: warm white Voltage: 5V IP class: IP65 Power source: 3 x AA batteries or USB Package includes: 1 x 1m/1.5m strip light, 1 x battery box, 1 x sensor, 1 x USB cable