Working voltage: 12V – 24VAC/DC
Frequency: 433.92 MHZ



Instructions of Standalone Receiver GE-RCV1

1. Wire connecting (2 core electric cables)

a. Red wire to power 12-24VDC

b. White wire to GND

2. Wire connecting (4 core electric cables)

a. White wire to OPEN

b. Red wire to CLOSE

c. Blue wire to STOP

d. Black wire to GND (or COM)

3. Transmitter learning

a. Check wire connecting before switch on the power

b. Press “LEARN BUTTON”, LED light is on, and then it will enter to

learning process.

c. Press “1” button two times, then LED light flashing. Then the

learning process is successed.

d. If “1” button is effective, White wire and black wire contact.

e. If “2” button is effective, red wire and black wire contact.

f. If “4” button is effective, blue wire and black wire contact.

g. Button”3” is null.

4. Transmitter

Transmitter： rolling code, 433.92MHz

5. Erase remote transmitters from the external receiver

Press and hold the learn button until the indicator light turns off,

then all transmitters will be removed from the external receiver.

Disclaimer: For use when the Gate or Garage Operator doesn't have

capabilities of Smart or Wireless Options, this receiver will enable


the ability of use the Smart Wireless Keypad