1．Overview
IEEE802.3z/AB 100/1000Mbps 10 port Fiber Switches supports three types media for network connection and switching such as 10/100/1000Base-T,1000Base-SX/LX and 100Base-SX/LX. The switch is designed with a switch controller and buffer memory that connects three types segments to operate smoothly. The Switch with 8*100M SFP port 100Base-SX/LX and 1*1000M SFP port and RJ45 port 10/100/1000Base-T(selectable). The RJ45 port support Half or Full Duplex modes. All SFP ports support only Full-Duplex modes. With external power unit, it provides good stability and reliability.

2.Checklist
Before you installing the Switch, verify that the package contains the following：
1．The 10 ports TP-SFP Gigabit Switch.
2．AC-DC Power Adapter.
3．This User’s Manual.
Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged.

3. LED Description
There are 14 LED At Front View of 10 port Fiber Switch.:
GE Lit when TP speed is 1000Mbps
10/100M Lit when TP speed is 100Mbps
FX1-FX8 Lit when 100M SFP*n connection is good or when SFP*n data is transmitting.
Act Lit when TP connection is good.
Blinks when TP data is transmitting.
GX Lit when 1000M SFP connection is good or when 1000M SFP data is transmitting.
RUN Lit when work good.
PWR Lit when +5V power is coming up.
n : 1-8

4.SFP Module Fiber Optic Technical
Specifications
Connector type LC LC
Fiber type Multi-mode Single-mode
Wavelength 850nm 1310nm
Max Distance 62.5µm: 224m
50µm: 550m 20Km
Min TX PWR -12.0dBm -11.0dBm
Max TX PWR -6.0dBm -5.0dBm
Sensitivity < -19dBm < -22dBm
Link Budget 7.0dBm 11.0dBm

Connector type LC LC
Fiber type Single-mode Single-mode
Wavelength 1310/1550nm 1550nm
Max Distance 40Km 80Km
Min TX PWR -5.0/-10dBm -3.0dBm
Max TX PWR 0dBm 0dBm
Sensitivity < -25dBm < -25dBm
Link Budget 20.0/15dBm 22.0dBm

Single Fiber Technical specification

Connector type LC/SC LC/SC
Fiber type Single-mode Single-mode
Wavelength 1310/1550nm 1310/1550nm
Max Distance 20Km 40Km
Min TX PWR -10.0dBm -5.0/-10dBm
Max TX PWR -4.0dBm 0dBm
Sensitivity < -22dBm < -25dBm
Link Budget 12.0dBm 20/15dBm

Connector type LC/SC LC/SC
Fiber type Single-mode Single-mode
Wavelength 1490/1550nm 1490/1550nm
Max Distance 60Km 80Km
Min TX PWR -6.0dBm -1dBm
Max TX PWR 0dBm 3dBm
Sensitivity -25dBm < -26dBm
Link Budget 19dBm 25.0dBm

5.Installing the 10 port Fiber Switch
1.Attach the SFP Module to SFP Cage on the Switch.
2.Attach fiber cable from the SFP on the Switch to the fiber network. The fiber connections must be matched: transmit socket to receive socket.
3.Attach a UTP cable from the TP network device to the RJ45 port on the Switch
4.Connect the power adapter to the Switch and check that the Power LED lights up. The TP SPD, Act and SFP LEDs will light when all the cable connections satisfactory.

6.Technical Specifications
The 10 Ports Fiber Switch conforms to the following standards:
Standards: IEEE 802.3u 100Base X
IEEE 802.3z/AB 10/1001000Base-T
1000Base-SX/LX/ZX
Fiber Cable:
1000SX: 50/125，62.5/125µm multi-mode
1000LX/ZX: 8.7/125, 9/125µm single-mode.
UTP Cable: Cat.5e or Cat.6 cable up to 100m.
(only 9 port switch)

Data Transfer Rate:
RJ45 port: 10M, 100M, 1000Mbps
SFP:100Mbps FX1—FX8
SFP: 1000Mbps.

LED Indicators :
FX1—FX8,GE,GX,10/100M ,RUN , , PWR.

Duplex Modes: RJ45 port: NWay Full/Half
Duplex auto- negotiation
SFP: full-duplex mode
Power Requirement: 220V(100-260V)AC，50Hz
DC5V/2A
Ambient Temperature: 0 ～ 50℃
Humidity: 5% ～ 90%
dimensions：33 × 225 × 125mm（H×W×D）