Endress+Hauser iTEMP HART TMT182-AAAAA Temperature Head transmitter thermometers Free shipping

Endress+Hauser (Datasheet can be offered by mail if you need)

iTEMP® HART® TMT182
Temperature head transmitter
Head transmitter for resistance thermometers (RTD),
thermocouples (TC), resistance and voltage transmitters (mV),
HART® -protocol, for installation in a sensor head Form B

Application
• Temperature head transmitter with HART® -protocol
for converting various input signals into an scalable
4 to 20 mA analog output signal
• Input:
Resistance thermometer (RTD)
Thermocouple (TC)
Resistance transmitter
Voltage transmitter (mV)
• HART® -protocol for front end unit or panel unit
operation using the hand operating module (DXR275,
DXR375) or PC (e. g. ReadWin® 2000 or FieldCare)
Your benefits
• Universal settings with HART® -protocol for various
input signals
• Operation, visualisation and maintenance via PC,
e. g. FieldCare operating software
• 2 wire technology, 4 to 20 mA analog output
• High accuracy in total ambient temperature range
• Fault signal on sensor break or short circuit,
presettable to NAMUR NE 43
• EMC to NAMUR NE 21, CE
• UL recognized component to UL 3111-1
• GL Germanischer Lloyd marine approval
• CSA General Purpose
• Ex-Certification
- ATEX Ex ia and dust zone 22 in
compliance with EN 50281-1
- FM IS
- CSA IS
• SIL2 compliant
• Galvanic isolation
• Output simulation
• Min./max. process value indicator function
• Customer specific linearization
• Linearization curve match
• Customer specific measurement range settings or
expanded SETUP