$137.25
Add to Cart
New Pair "4-on-4" Wheel Hubs with 1" Bore, for Magnum PermaGreen® and Mower Racers
Please use the link at the bottom of the page and read our "Terms" before placing an Order. They include shipping information and payment options.
Offering these new “4-on-4” replacement mig-welded wheel hubs to fit 1”-diameter axles.
These hubs have the industry-standard 4-bolt lug pattern on a 4”-diameter bolt circle. The wheel-mount plate is 5-1/2” OD x 5/16” thick. The lug bolts are ½”-20 SAE thread and extend 7/8” from the wheel-mount face. The lug nuts are included, as shown. The hub length is 4-1/4” x 1-5/8" OD (5/16" wall thickness) and has the full-length ¼” keyway. The wheel-mount face of the hub is 3/4" back from the outer edge of the hub, with 3-3/16" of hub length behind the wheel-mount face. The wheel-mount face is mig-welded to the hub on both front and back for structural integrity. They have the silver-gray powder-coated finish.
These custom hubs are identical to the rusted-solid-and-impossible-to-remove hubs on PermaGreen® Magnum and some Triumph spreaders that use the Peerless 855-Series transaxle with 1” axles. NOTE that after 2024, PermaGreen will no longer make these hubs available to Magnum owners and users except in rare circumstances.
PERMA-GREEN TRIUMPH NOTE: If you have a Triumph with the hubs and included drums (Photo 2), these hubs will not work on your Triumph -- you will need to order PermaGreen hubs.
I also offer the PermaGreen Magnum Shaft-Hardware Kit for $24.00 which includes Two 316-Grade Stainless-Steel spacers that go between the axle-housing bearings and the back side of the wheel hubs to prevent the hubs from damaging the bearings and seals, two axle-keyway keys, two outer thrust washers to hold the keys in behind the axle-end jam/Nylock nuts or E-rings, and one key for the input-shaft pulley.
And I offer the Ground Logic / Ferris Shaft-Hardware Kit for $31.00 which includes two 316-Grade Stainless-Steel spacers that go between the axle-housing bearings and the back side of the wheel hub spacers to prevent the spacers from damaging the bearings and seals, two long spacers, two axle-keyway keys, three inner thrust washers to provide proper hub spacing, two outer thrust washers to hold the keys in behind the outer-groove E-rings, two outer E-rings, and one key for the input-shaft pulley.
No sales tax if sold outside Missouri. Sales tax of 5.225% must be charged to a Missouri Buyer.
QUESTIONS? Please -- before you ask a "Will-they-fit?" question, compare the measurements of your hubs to the dimensions I have listed above for these hubs.
SHIPPING: Buyer pays shipping from Postal Code 64730 USA. I can ship this Item worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. Shipping weight is approximately 9# per pair. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please let us know. If you buy these hubs with a transaxle, I can ship everything in one box.
FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.
Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
Offering these new “4-on-4” replacement mig-welded wheel hubs to fit 1”-diameter axles.
These hubs have the industry-standard 4-bolt lug pattern on a 4”-diameter bolt circle. The wheel-mount plate is 5-1/2” OD x 5/16” thick. The lug bolts are ½”-20 SAE thread and extend 7/8” from the wheel-mount face. The lug nuts are included, as shown. The hub length is 4-1/4” x 1-5/8" OD (5/16" wall thickness) and has the full-length ¼” keyway. The wheel-mount face of the hub is 3/4" back from the outer edge of the hub, with 3-3/16" of hub length behind the wheel-mount face. The wheel-mount face is mig-welded to the hub on both front and back for structural integrity. They have the silver-gray powder-coated finish.
These custom hubs are identical to the rusted-solid-and-impossible-to-remove hubs on PermaGreen® Magnum and some Triumph spreaders that use the Peerless 855-Series transaxle with 1” axles. NOTE that after 2024, PermaGreen will no longer make these hubs available to Magnum owners and users except in rare circumstances.
PERMA-GREEN TRIUMPH NOTE: If you have a Triumph with the hubs and included drums (Photo 2), these hubs will not work on your Triumph -- you will need to order PermaGreen hubs.
I also offer the PermaGreen Magnum Shaft-Hardware Kit for $24.00 which includes Two 316-Grade Stainless-Steel spacers that go between the axle-housing bearings and the back side of the wheel hubs to prevent the hubs from damaging the bearings and seals, two axle-keyway keys, two outer thrust washers to hold the keys in behind the axle-end jam/Nylock nuts or E-rings, and one key for the input-shaft pulley.
And I offer the Ground Logic / Ferris Shaft-Hardware Kit for $31.00 which includes two 316-Grade Stainless-Steel spacers that go between the axle-housing bearings and the back side of the wheel hub spacers to prevent the spacers from damaging the bearings and seals, two long spacers, two axle-keyway keys, three inner thrust washers to provide proper hub spacing, two outer thrust washers to hold the keys in behind the outer-groove E-rings, two outer E-rings, and one key for the input-shaft pulley.
No sales tax if sold outside Missouri. Sales tax of 5.225% must be charged to a Missouri Buyer.
QUESTIONS? Please -- before you ask a "Will-they-fit?" question, compare the measurements of your hubs to the dimensions I have listed above for these hubs.
SHIPPING: Buyer pays shipping from Postal Code 64730 USA. I can ship this Item worldwide. Within the USA, Item will be shipped UPS Ground Insured unless the buyer specifies otherwise. Item will be shipped promptly after receiving proper payment. Shipping weight is approximately 9# per pair. If the eCrater Shipping Wizard costs appear to be high in your Checkout, please let us know. If you buy these hubs with a transaxle, I can ship everything in one box.
FEEDBACK: Our Feedback is 100%, which is good. The latest Feedback, however, is in December of 2011, which may raise questions. The reason for this is because we had to drop PayPal as an Approved Payment Method in our Store due to eCrater’s restrictions, and the only way Feedback can be left is if we show PayPal as an Approved Payment Method and the Buyer pays with PayPal through the eCrater Checkout. For this reason, there are no Feedbacks since December of 2011, even though we’ve had hundreds of satisfied customers since then. If you would like to get a referral from a recent customer near you, please let us know. We have nothing to hide, and your satisfaction is our priority.
Our philosophy..."No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation."
