$15.13
On Hold
EL-55 Wired Infrared PIR Motion Human Sensor Detector Probe
More than 10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Wholesale EL-55 Wired Infrared PIR Motion Human Sensor Detector Probe. MOQ 1 piece.
Shipped in 3 days! Free shipping with Tracking No.
- NO.P201212170032
- Details:
- EL-55 Wired Infrared PIR Motion Human Sensor Detector Probe
- Digital micro process control, and motion recognition function
- Dual passive infrared tube, precision parabolic Fresnel lens technology to improve the efficiency of the energy reception
- SMD technology, digital automatic pulse conditioning, Bi-temperature compensation, automatic environment memory, more reliable product performance
- High sensitivity, judgment accurate, sophisticated technology
- Eliminate false positives and false negatives, and performance far beyond the ordinary passive infrared detectors
- Installation instructions
- Open the housing by removing screw located at the bottom of the unit
- Remove the PCB by turning counterclockwise and removing the "Easy Lock"
- Knock out the required mounting and wiring holes
- Thread the wires through the wiring holes (from the outside of the unit)using the appropriate wiring hole knock outs shown in figure 2
- choose an appropriate mounting height from table 1 and attach the base to the wall
- Connect the wires to the terminal block as shown in figure 1
- Installation Notice:
- A correct installation position should be avoided in the following areas: outdoor, have a pet place near, air conditioning, heat source, near the sun point-blank place, rotating objects below.
- installation surface should be strong, and do not shake,
- detector should be installed in the invaders easily through the places.
- detector support should be fixed on the wall with screws
- detector should be hung up, turn on the power switch can work normally
- Specification:
- Operating voltage: 9-16VDC
- Power: Standard: 15mA, alarm: 17mA
- Alarm interval: 1 second
- Pulse number: 1, 2 or 3 optional
- Sensor: dual-source
- RF Immunity: 30V / m to 1GHZ
- Alarm relay: 30VDC/0.3A
- Tamper relay: 30 VDC/50mA
- Reverse battery protection: Diode
- Fire protection: ABS plastic housing
- LED indicator: jumper selectable
- Dimensions: 114 X 60 X 50mm
- Package: 1 x Wired infrared detector + English Manual
Shipped in 3 days! Free shipping with Tracking No.
- NO.P201212170032
- Details:
- EL-55 Wired Infrared PIR Motion Human Sensor Detector Probe
- Digital micro process control, and motion recognition function
- Dual passive infrared tube, precision parabolic Fresnel lens technology to improve the efficiency of the energy reception
- SMD technology, digital automatic pulse conditioning, Bi-temperature compensation, automatic environment memory, more reliable product performance
- High sensitivity, judgment accurate, sophisticated technology
- Eliminate false positives and false negatives, and performance far beyond the ordinary passive infrared detectors
- Installation instructions
- Open the housing by removing screw located at the bottom of the unit
- Remove the PCB by turning counterclockwise and removing the "Easy Lock"
- Knock out the required mounting and wiring holes
- Thread the wires through the wiring holes (from the outside of the unit)using the appropriate wiring hole knock outs shown in figure 2
- choose an appropriate mounting height from table 1 and attach the base to the wall
- Connect the wires to the terminal block as shown in figure 1
- Installation Notice:
- A correct installation position should be avoided in the following areas: outdoor, have a pet place near, air conditioning, heat source, near the sun point-blank place, rotating objects below.
- installation surface should be strong, and do not shake,
- detector should be installed in the invaders easily through the places.
- detector support should be fixed on the wall with screws
- detector should be hung up, turn on the power switch can work normally
- Specification:
- Operating voltage: 9-16VDC
- Power: Standard: 15mA, alarm: 17mA
- Alarm interval: 1 second
- Pulse number: 1, 2 or 3 optional
- Sensor: dual-source
- RF Immunity: 30V / m to 1GHZ
- Alarm relay: 30VDC/0.3A
- Tamper relay: 30 VDC/50mA
- Reverse battery protection: Diode
- Fire protection: ABS plastic housing
- LED indicator: jumper selectable
- Dimensions: 114 X 60 X 50mm
- Package: 1 x Wired infrared detector + English Manual













CN, Guangdong