USB HandHeld Scopemeter/Oscilloscope DMM 5.7" DSO1060
Software：
Operating system: Windows NT, Windows 2000, Windows XP ,VISTA
SecondDesign：
Supply DEMO code (VC、VB、LABVIEW)
Accessories includes：

















Connected to the computer can be used as a virtual oscilloscope

MATH, REF

6000 COUNTS Digital Multimeter

The cursor function

22 kinds of waveform measurements

ALT MAG, easy to search for signal

X-Y mode

FFT Provide spectrum analysis function

ALT trigger mode, dual time base, easy to observe two signals of different frequency

Test signal more than 100MHz by ETS mode

Document management, and convenient file storage and management

built-in help system

Characteristic (Handheld Scopemeter/Oscilloscope/Multimeter)

Hardware Specification :
* l Excellent Industrial Design .Direct key for Each Channel ,Time base ,Trigger and DMM,easy to operate.
* l Large 5.7 inch TFT Color LCD Display ,Led backlight,Display clearly.
* l USB Host/Device 2.0 full-speed interface ,support removeable disk, RS-232/LAN Optional ,Easy to control by PC or long-distance.
* l High Bandwidth 60MHz Oscilloscope ,and 6000 COUNTS high precision DMM.
* l High refresh rate，High Real-time Sample Rate 150MS/s-2GS/s, 50GS/s Equivalent-time Sample Rate.
* l FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check ,easy to use on production line.
* l Multiform Trigger mode ,2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency.
* l 1000 waveforms save and record.
* l Battery Power Operation (Installed) Industrial Design.
* l Save waveform in the following: jpg/bmp graphic file, MS excel/word file.
* l Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
* l LabviewVBVC Second Design instance.

MODE
DSO1060
VERTICAL
Channels
2
Bandwidth
60MHz
Rise Time
5.8ns
Input Impedance
Resistance: 1M ; Capacitance: 15 pF
Input Sensitivity
10mV/div to 5V/div
Input Coupling
AC, DC and GND
Vertical Resolution
8 bits
Maximum Input
400V (DC+AC Peak)
HORIZONTAL
Real-Time Sampling Rate
150MSa/s
Equivalent Sampling Rate
50GSa/S
Time Base Range
5ns/div~1000s/div
Memory Depth
32k at Single Channel, 16k at Dual Channel
Time Base Precision
±50ppm
TRIGGER
Source
CH1, CH2
Mode
Edge, Pulse Width, Alternative
X-Y MODE
X-Axis Input
Channel 1
Y-Axis Input
Channel 2
Phrase Shift
Max.3 degree
CURSORS AND MEASUREMENT
Voltage Measuremet
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measuremet
Frequency,Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Delay Measuremet
Delay time from ch1 rising edge to ch2 rising edge
Delay time from ch1 falling edge to ch2 falling edge
Cursors Measuremet
Manual, Track, Auto Measure Modes
Waveform Signal Process

CH1+/- CH2, CH1xCH2, CH1/CH2, FFT, Invert
Storage
Storage
15 Waveforms and Setups
METER MODE
Maximum Resolution
6,000 Counts
DMM Testing Modes
Voltage, Current, Resistance, Capacitance,Diode & Continuity
Maximum Input Voltage
AC: 600V, DC: 800V
Maximum Input Current
AC: 10A, DC: 10A
Input Impedance
10 MΩ
DISPLAY
TFT LCD Type
5.7 Inch with LED Backlight Display
Display Resolution
240 (Vertical) x 320 (Horizontal) Dots
INTERFACE
USB
USB Host / Device 2.0 Full Speed Supported
Optional
RS232, LAN
POWER SOURCE
Line Voltage Range
AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA
Battery Power (Installed)
6 Hours (Li-ion Battery)
MECHANICS
Dimension
245 x 163 x 52 (mm)
Weight
2.5Kgs
Other
GND Reference
Oscilloscope and Multimeter Independence