Parameters:

•1.Ballast input voltage: 9 ~ 16V
•2.Working current: 5.4 A
•3.Output power:first gear 75W,second gear 55W,third gear 35W
•4.Battery types: 6600mAh Battery
•5.charging and discharging times: ≥500 times
•6.Accessories: 3A charger, filter, braces, car charger, aluminum alloy packaging, 6600MAH batteries.
•7.three gears

Perfect high temperature protection function, elongate lifetime

When flashlight hand shank temperature arrived 45 °C, adjust to minimum power automatically, battery red LED flicker. When Flashlight hand shank temperature arrived 48 °C, flashlight auto power-off. When battery red LED flash flicker for 20 seconds, then flashlight can work .





Perfect double low-voltage function

Build in dedicated Li-ion battery protective plate and SCM identifying low voltage circuit When battery voltage less than 9V, push switch button only red led flicker, Ballast will auto stop working.this moment,the three LED can light up 22hours continuously . Can work safely when charge power full.



Low-voltage hint function, mention users charge in time.

When battery capacity less than 20%, now hard light will changing-over between low gear and middle gear,means no enough power.



International SOS signal for help

When turn on , push the switch button 3 seconds,the SOS function is OK. Can use it in special conditions.



LOW current start,elongate battery liftetime

Effectively reduce the impact for battery and ballast when turn on, so the steady voltage enhance in turn on process. Good for elongate the lifetime for battery and ballast.



Using Instruction:



One shift HID flashlight: press the switch one time light turn on, press second time turn off the flashlight.
Two shift HID flashlight: press the switch turn on(brightest), second press turn the light down, third turn off.
Three shift HID flashlight: press the switch turn on(brightest), second press turn the light down(medium), third press turn it down to week, forth press turn off.
Adjust: Rotate the head to select the best facula.
Recharge: Get the battery by open the back cover, set into the DC( Red indicates charge, blue indicate full).Full changer takes about three hours and a half , the indicate light is blue.